OPERATION

12. MOWER STORAGE

Properly preparing and storing the mower at the end of the season is critical to maintaining its appearance and to help ensure years of dependable service. The following are suggested storage procedures:

Thoroughly clean all debris off the mower to prevent damage from rotting grass and standing water.

Lubricate all mower grease points and fill gearbox oil levels as detailed in the maintenance section.

Tighten all bolts and pins to the recommended torque.

Check the mower for worn and damaged

parts. Perform repairs and make replacements immediately so that the mower will be ready for use at the start of the next season.

Store the mower in a clean, dry place with the mower housing resting securely on blocks or at ground level.

Keep the driveline yoke from sitting in water, dirt and other contaminants.

Use spray touch-up enamel where necessary to prevent rust and maintain the appearance of the mower.

It is critical that driveline clutches slip when an obstacle or heavy load is encountered to avoid mower and/or tractor damage. If the mower sits outside for an extended period of time or is exposed to rain and/or humid air, the clutch lining plates must be inspected to ensure they are not frozen together from rust or corrosion. If the mower has been exposed to such conditions, at the start of each mowing season, and any time it is suspected that the slip clutch plates may be frozen together, readjust the slip clutch as detailed in Seasonal Clutch Maintenance of the maintenance section in this manual. OPS-R-0032_B

TURBO 96 01/11

Operation Section 4-43

© 2011 Alamo Group Inc.

OPERATION

Page 155
Image 155
Rhino Mounts TURBO 96 manual Mower Storage