Before Using Your Battery Charger, Plugging IT

BEFORE USING YOUR BATTERY CHARGER

It is important to understand the charger’s requirements. This section explains the charger’s electrical requirements and how to prepare a battery for charging.

PLUGGING IT IN

Your charger requires a 120V AC re- ceptacle installed according to all local codes and ordinances.

USING AN EXTENSION CORD

The use of an extension cord is not recommended. If you must use an exten- sion cord, please make sure that you follow these guidelines:

•Make sure that pins on plug of exten- sion cord are the same number, size, and shape as those of plug on char- ger.

•Check that the extension cord is properly wired and in good electrical condition.

•Make sure that the wire size is large enough for its length and for the AC ampere rating, as specified in the chart below.

MINIMUM RECOMMENDED EXTENSION CORD

Length of Cord, in Feet	25	50	100	150
AWG* Size of Cord	18	16	12	10
*AWG=American Wire Gauge

Preparing your battery to be charged

It is important that you read and follow these guidelines while you are preparing to charge the battery.

•Make sure that you have a 12 volt or 6 volt lead-acid battery. Determine volt- age of battery by referring to vehicle owner’s manual or the battery mark- ings. Be sure to set the charger to the 6V or 12V mode accordingly.

•Clean the battery terminals. Be careful to keep corrosion from getting in or around your eyes.

•Wear safety glasses. See additional “Personal Safety Precautions” on page 4.

•If required, for batteries with remov- able vent caps, add distilled water to each cell until the battery acid reaches the level recommended by the manu- facturer. This will help purge excessive gases from the cells. Be careful not to overfill. If you have a sealed battery with non-removable vent caps, no ac- tion is necessary.

•Take time to read all of the battery manufacturer’s specific precautions, such as removing or not removing vent caps while charging, and recommend- ed rates of charge.

•Be sure that the area around the bat- tery is well ventilated while it is being charged. Gas can be forcefully blown away by using a piece of cardboard or other nonmetallic material as a fan.

•If it is necessary to remove the battery from the vehicle to charge it, always remove the grounded terminal from the battery first. Turn off all vehicle acces- sories to avoid sparks from occurring.

•NOTE: A marine (boat) battery in- stalled in a boat must be removed and charged on shore.

600A specifications

The Schumacher 600A is a highly versatile battery charger designed to meet the needs of both amateur and professional users. It is particularly suited for charging and maintaining a variety of 12V batteries, including those found in cars, trucks, motorcycles, and recreational vehicles. With a robust design and user-friendly features, the Schumacher 600A is a standout choice in the crowded market of battery chargers.

One of the main features of the Schumacher 600A is its powerful charging capability, boasting a peak output of 600 amps. This allows for quick and efficient charging, ensuring that even deeply discharged batteries can be revived quickly. The unit is equipped with multiple charging options, providing users with 2-amp, 10-amp, and 50-amp charge settings. This flexibility enables users to select the most suitable charging rate for their specific battery needs, whether they require a fast charge or a more gradual approach for battery maintenance.

The Schumacher 600A is also designed with advanced technologies to enhance safety and efficiency. It incorporates a microprocessor-controlled system that actively monitors the charging process. This feature helps to prevent overcharging, which can lead to damage and reduced battery life. The charger also includes a built-in safety timer that disconnects power once the charging cycle is complete, providing peace of mind to users.

Another notable characteristic of the Schumacher 600A is its rugged construction. With a durable exterior and built-in wheels, the charger is designed for portability and ease of use. It can withstand the rigors of both professional garages and DIY settings, making it a reliable choice for diverse applications. The user-friendly control panel includes clear indicators and easy-to-understand settings, ensuring users can operate the charger with minimal hassle.

Additionally, the Schumacher 600A features reverse polarity protection, preventing potential damage from incorrect connections. This extra layer of safety is crucial for less experienced users, as it safeguards the charger and the battery being charged.

In conclusion, the Schumacher 600A is a powerful, reliable, and user-friendly battery charger that combines advanced technology with robust construction. With its multiple charging options, safety features, and portability, it is an excellent investment for anyone looking to maintain their batteries efficiently and effectively. Whether for home use or professional settings, the Schumacher 600A delivers performance you can trust.