Master Appliance GG-100 Fill with Ultratane Butane, Ignition Instructions, Adhesive Application

Page 5

Fill with Ultratane™ Butane

Use only Master Ultratane butane with your Glue Gun. Do not fill gas or store near open flame, heater, furnace or combustible materials. Make sure the unit is cool before re-fueling and that the switch is turned to the “OFF” position. Fill gas holding the unit firmly with the refill nozzle pointed upwards. Insert nozzle into the gas filling valve and press down. Use pumping action for best results (Fig. 1). Gas will overflow from nozzle when tank is full. After filling allow the gas to stabilize for a few min- utes before lighting.

Ignition Instructions

1.Use only 1/2” diameter glue sticks. Insert glue stick through tunnel at the back of gun (Fig.2).

2.Push the Fuel Flow Control upward (Fig.3A) and turn wheel to the right (+) enough to hear a small “Hissing” sound (Fig. 3B).

3.Push the “Ignition Switch” to ignite the flame. Hold for about 5-10 seconds before releasing (Fig. 4).

4.After igniting, the ceramic elements inside the air vent will glow “red” (Fig. 5). Tip the gun forward on folding stand under the nozzle to stand the gun. Wait for a few minutes for it to heat up and allow the glue to melt and soften.

5.To increase the fuel flow, adjust the Fuel Flow Control to the right (+) (Fig. 6)

Adhesive Application

1.Direct nozzle tip at any clean/dry surface you wish to bond. Check for proper adhesive selection.

2.To apply melted adhesive use steady finger pressure on feed trigger. Release feed trigger to stop flow of adhesive.

3.Do not use excessive pressure on feed trigger.

4.Insert 1/2 inch glue stick into transport mechanism as needed.

1

(Fig 1)

0

PRO

Glue Gun

2

A

B

GG-100

PORTAPRO

3

4

5

GG-100

 

PRO

PORTA

Gun

Butane Powered Glue

 

 

6

Page 4 Page 6
Image 5
Page 4 Page 6
Contents GG-100 Page Description Accessories Available Important Safety InstructionsAdhesive Application Fill with Ultratane ButaneIgnition Instructions Storage of Your PortaPro Glue Gun How to Empty Tank of Butane Gas if NeededTo Change Nozzle Tip Specifications Trouble ShootingOne Full Year Warranty Avertissements‑ Pistolet à colle fonctionnant Au butaneBec appli Maintenir hors de portée des enfants Consignes de sécurité importantesUtilisation pour collage Remplissez avec du butane UltrataneInstructions d’allumage Comment vider le réservoir de gaz butane, si nécessaire Pour changer la pointe du becEntreposage du pistolet à colle PortaPro Caractéristiques DépannageButane Ultratane FrenchGarantie d’un an Pistola aplicadora de pegamento ali‑ Mentada por butano Precauciones AdvertenciasBoquilla Instrucciones importantes de seguridad Aplicación de pegamento Cargue con gas butano UltrataneInstrucciones de encendido Cómo vaciar el tanque de gas butano si es necesario Cambio de la punta de la boquillaAlmacenamiento de su pistola de pegamento PortaPro Problema Causa probable Solución Búsqueda y solución de problemasAccesorios disponibles Garantía por un año

GG-100 specifications

The Master Appliance GG-100 is a powerful, versatile heat gun designed for a wide range of industrial and DIY applications. Known for its robustness and reliability, the GG-100 provides users with high-performance features that enhance both ease of use and efficiency in various tasks.

One of the standout features of the GG-100 is its adjustable temperature range. With temperatures reaching up to 1,000 degrees Fahrenheit, it enables users to tackle different types of materials and applications with precision. This versatility allows the heat gun to be employed for tasks such as paint stripping, plastic molding, shrink wrapping, and even soldering components in electronics.

The GG-100 boasts two distinct air flow settings, allowing users to control the intensity of the heat being applied. This dual setting not only aids in achieving the desired warmth for specific tasks but also helps prevent damage to more delicate materials. The combination of adjustable temperature and airflow settings is particularly advantageous for professionals needing to switch between tasks swiftly without compromising on performance.

Ergonomically designed, the GG-100 features a lightweight and balanced construction, which minimizes user fatigue during extended use. The comfortable grip ensures that users can maintain control and accuracy, essential for detailed work. Additionally, the built-in thermal overload protection ensures safety, automatically shutting off the unit in case of overheating, thus providing peace of mind during operation.

Durability is another key characteristic of the GG-100. Constructed with high-quality materials, this heat gun is built to withstand the rigors of frequent use in demanding environments. The heating element is engineered for longevity, ensuring that users can rely on the GG-100 for years of consistent performance.

In terms of design, the GG-100 features a compact shape that facilitates easy handling and storage. Its simplicity and ease of operation make it an ideal choice for both seasoned professionals and amateurs alike. Coupled with accessories such as nozzles for directing airflow, the GG-100 adapts easily to various applications.

In conclusion, the Master Appliance GG-100 heat gun impresses with its powerful performance, adjustable settings, ergonomic design, and durability. Whether for professional or personal projects, it stands out as an essential tool that enhances efficiency and precision in heat-related tasks.
Top Page Image Contents