IMPORTANT SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WARNING: When using Electric Tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:
1.KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
2.CONSIDER WORK AREA ENVIRONMENT. Don’t expose power tools to rain. Don’t use power tools in damp or wet locations. Keep work area well lit.
3.KEEP CHILDREN AWAY. All visitors should be kept away from work area. Do not let visitors contact tool or extension cord. Supervise the use of this tool by children.
4.STORE IDLE TOOLS. When not in use, tools should be stored in dry, high or
5.USE SAFETY GLASSES.
6.DON’T ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges.
7.DON’T OVERREACH. Keep proper footing and balance at all times.
8.DISCONNECT TOOLS. When not in use, before servicing and when changing accessories.
9.This tool is recommended for indoor use only
10.STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when you are tired.
11.DO NOT TOUCH THE HEATED NOZZLE OF THE GLUE GUN OR THE HOT MELT GLUE. The operating temperature of this tool is 390°F (199 °C). Do not allow contact with skin or surfaces not intended to be glued.
12.NEVER attempt to use any material other than recommended glue sticks, sealer, or caulk sticks in the glue gun. For example: Do not attempt to melt crayons or candles. Permanent damage to the glue gun could result.
13.DO NOT use hot melt glue to take the place of structural fasteners.
14.The glue sticks used with this glue gun will begin to soften at about 140°F. Don’t use the glue on objects that should not be subjected to temperatures of 140°F (60 °C) or above.
15.DO NOT ATTEMPT TO REMOVE THE UNUSED PORTION OF A GLUE STICK FROM THE TOOL.
16.NEVER attempt to force cool the gun after use by immersing any part of it in water or any other liquid. Allow the gun to air cool only.
17.ALWAYS BE SURE THAT THE GLUE GUN IS COOL BEFORE STORING IT OR CHANGING NOZZLES.
18.THE GLUE GUN IS ON as soon as it is seated in the cradle and the cord is plugged in.
19.WHEN NOT IN USE, DO NOT LEAVE THE GLUE GUN PLUGGED IN FOR AN EXTENDED TIME. DO NOT LEAVE UNATTENDED.
20.AVOID ACCIDENTAL GLUE DISCHARGE. Feeding or pushing glue sticks with too much force into a heated gun may damage glue gun cause hot glue to be unexpectedly expelled from nozzle.
21.DO NOT store glue sticks in direct sunlight for extended periods.
22.ALWAYS work in a well ventilated area.
NOTE: This tool will become quite warm during use. This is normal and does not indicate a problem. Avoid contact with top housing surface.
WARNING: This product contains chemicals, including lead, known to the state of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
First Aid Measures for Glue Sticks
Glue sticks are not intended for ingestion and should not come in contact with food, etc. If swallowed, seek medical attention. Material Safety Data Sheet (MSDS) available from
2