Parts, Part Description Qty | Graco 24R021 specs

Parts

14 8

8 13			4
12			4
12
5 9
3	6	4 8
3	6
		10	2 7
			1

Parts

4	6
27	6	9

ti20581b

28	7 12
16

10 11 18

NOTE: Apply thread sealant on all tapered thread fittings.

3When installing a new ball valve (8), remove the acorn nuts and handle from the ball valves (8). Keep the acorn nuts, discard the handle.

4Install and tighten ball valves (8) so that the studs are pointing away from each other. The flats line up squarely with the flat of the inlet manifold (1), and the pressure laser marking are on the handle (2) side of the inlet manifold (1).

5Orient lever (9) and adjust balls in valves (8) so they are closed when lever is pulled back. Carefully install the lever onto the ball valve (8) studs, making sure the stud flats line up with the slots in the lever.

6Install acorn nuts from ball valves (8) on top of the lever (9). Torque to 40-50 in-lb (4.5-5.6 N•m).

7 Apply

red thread locking liquid to the threads of the handle (2).

8Make sure that #6 JIC adapter (13) is on the right and #5 JIC adapter (14) is on the left of the inlet manifold (1), when viewed from the rear of the gun.

9Squarely align outlet manifold (6) to inlet manifold (1).

10Apply lithium grease.

11Torque restrictors (18) to 40-50 in-lb (4.5-5.6 N•m).

12Hand tighten mixer nut (7) onto outlet manifold (6).

Ref	Part	Description	Qty
1	24R986	MANIFOLD, inlet	1
2	16U410	HANDLE, manual 2K gun	1
3	16F422	GRIP, handle, 390st	1
4	119984	FITTING, union, 1/8 npt x 5/16 tube	4
5	15G421	TUBE, 5/16 extension, assembly	2
6	24K994	MANIFOLD, outlet	1
7	512292	NUT, mixer	1
8	214037	VALVE, ball, 1/4, 5000 psi, with lever	2
9	217562	LEVER, valve	1
10	100721	PLUG, pipe	2
12	113093	CONNECTOR, pipe	2
13	117506	FITTING, swivel, 1/4 npt x #6 JIC	1
14	117595	FITTING, swivel, 1/4 npt x #5 JIC	1
15	512289	MIXER, 1/2-30 spray	10

Ref	Part	Description	Qty
16	111516	PACKING, o-ring	2
17	249036	PACKING, o-ring (not shown),	1
		includes qty 6 of item 16
18	15E373	RESTRICTOR, 0.024 in.	2
19	15K652	CAP, night	1
27	563199	VALVE, check, 1/8 npt, rev, 5000	2
28	15E378	FILTER, screen, 40 mesh	2
29	118665	GREASE, Fusion®	1
30	117661	VISE, drill pit pin	1
31	---	BIT, 0.024 in. cleanout drill	1
32	15E374	RESTRICTOR, 0.032 in.	1

--- Not for sale.

Items are shipped loose.

332198C