Graco 24R021 Technical Data, Typical Restrictor Pressure Drop, Pressure Drop in psi MPa, bar

Page 15

Technical Data

Typical Restrictor Pressure Drop

Pressure Drop in psi (MPa, bar)

2500 (17.5, 175)

2000 (14.0, 140)

1500 (10.5, 105)

1000 (7.0, 70)

500 (3.5, 35)

0.094	0.062	0.040	0.032	0.024	0.018
15E377	15E376	15E375	15E374	15E373	15E372

Restrictor Diameter and Part No.

Key:

5000 cps, 1.0 gpm (3.8 lpm)

5000 cps, 0.25 gpm (0.95 lpm)

1000 cps, 0.25 gpm (0.95 lpm)

500 cps, 0.25 gpm (0.95 lpm)

200 cps, 0.25 gpm (0.95 lpm)

200 cps, 0.10 gpm (0.38 lpm)

249036 O-ring (CC)

Restrictors use 40 mesh screens and o-rings. Order 249037 Screens (package of 10) and 249036 O-rings (package of 6).

Restrictor	249037
Fitting (AA)	Screen (BB)

TI5627a

TI5628a

FIG. 2

Technical Data

Maximum Fluid Working Pressure	2000 psi (14 MPa, 137 bar)
Wetted Parts	Carbon steel, stainless steel, aluminum, chemically resis-
	tant o-rings, PTFE, PEEK

332198C

15

Image 15

Contents 2K Manual Dispense Valve Important Safety InstructionsRelated Manuals ContentsToxic Fluid or Fumes Hazard Equipment Misuse Hazard Important Isocyanate ISO Information Changing Materials Key InstallationPrime Perform Pressure Relief Procedure onInstall Restrictors or Plugs, see OperationDispense Install Disposable Static MixerPerform Pressure Relief Procedure, Ratio CheckingFlushing Pressure Relief Procedure Daily ShutdownRoutine Cleaning MaintenanceInstall Restrictors or Plugs Volume Balancing Problem Cause Solution TroubleshootingPart Description Qty PartsRestrictor Kit AccessoriesRestrictor Diameter and Part No Key Technical DataTypical Restrictor Pressure Drop Pressure Drop in psi MPa, barGraco Information Graco Standard Warranty