Tractor Requirements, Driveline Set-Up

Table of Contents

Section 1: Assembly and Set-Up

Land Pride

Tractor Requirements

This Powered Ditcher is designed with a Category 2 and 3, 3-point hitch. The maximum horsepower rating for the tractor is 120 HP depending on lift capacity and field conditions. Front tractor weights and/or ballast to tires may be required to offset weight of unit. Consult your tractor manual for details.

!CAUTION

Your Ditcher must be mounted only on a tractor equipped with a Category 2 or 3 hitch. Failure to do so may result in serious injury.

Driveline Set-Up

If the Ditcher is to be used on more than one tractor, an additional driveline may be required - especially if a quick hitch is used.

!CAUTION

Do not use a PTO adaptor with a quick hitch. A PTO adapter will increase the strain on the tractor’s PTO shaft and can damage the PTO shaft and tiller driveline.

!WARNING

Tractor Hook-Up

Damaged drivelines can cause serious injury or death.

!DANGER

Tractor hook-up to equipment is dangerous and can result in serious injury or death. Do not allow anyone to stand between the Powered Ditcher and tractor during hook-up operations. Do not operate the hydraulic 3-point lift controls while someone is directly behind the tractor or near the implement.

!DANGER

Hydraulic fluid under pressure can penetrate skin. Wear protective gloves and safety glasses or goggles when working with hydraulic systems. Use a piece of cardboard or wood rather than hands when searching for hydraulic leaks. If hydraulic fluid is injected into the skin, it must be treated by a doctor within a few hours or gangrene may result.

1.Slowly back tractor up to the Powered Ditcher while using the tractor’s 3-point hydraulic control to align the lower hitch link holes with the clevis lug holes on the implement.

2.Engage tractor park brake, shut tractor engine off and remove key before dismounting from tractor.

3.With tractor’s lower hitch arms aligned and positioned in the clevises, attach the lower arms to the clevises with hitch pins and secure with linch pins.

4.Connect top center link to the upper pivot hitch using customer supplied clevis pin and linch pin.

5.Ensure that the lower hitch arms are blocked to prevent excessive side movement.

6.Return to the tractor and slowly operate the 3-point controls up and down to check for clearance between the implement and tractor. Move or remove the drawbar if it interferes with the Powered Ditcher.

7.Manually adjust one of the two lower lift arms up or down to level the Powered Ditcher from left to right. Manually adjust the length of the top-link to level the Powered Ditcher from front to rear.

!CAUTION

Tractor PTO shield and all Ditcher guards must be in place at all times during operation!

IMPORTANT: Some tractors are equipped with multispeed PTO ranges. Be certain your tractor ‘s PTO is set for the correct PTO speed.

IMPORTANT: Avoid premature driveline breakdown. A driveline that is operating must not exceed an angle of 25 degrees up or down while operating the 3-point lift. See Figure 1-1 below.

24872

Maximum Allowable Driveline Movement

Figure 1-1

Checking Driveline Minimum Length

IMPORTANT: Always check driveline minimum length and maximum allowable length during initial setup and when connecting to a different tractor. More than one driveline may be required to fit all applications.

DT55 & DTM55 Powered Ditchers 324-053M

3/17/08

Powered Ditchers, DT55, DTM55 specifications

Land Pride DTM55 and DT55 are powerful and versatile options for those in need of high-performance implements for their compact tractors. Designed for efficiency and durability, these models stand out in the market for their innovative features and robust construction.

One of the primary attributes of the DTM55 and DT55 series is their impressive compatibility with a wide range of compact tractors, allowing operators to maximize productivity across various applications. These models are engineered to handle tasks such as tilling, cultivating, and preparing seedbeds with ease. The adaptability to different tractors ensures that users can make the most of their equipment investment, enhancing overall efficiency on the field.

Both the DTM55 and DT55 feature a durable build, employing high-quality materials to withstand the demands of heavy-duty use. The robust frames and sturdy components provide resilience, ensuring these implements can tackle challenging terrain and tough working conditions. This durability is essential for farmers and landscapers who rely on their equipment day in and day out.

In terms of technology, the DTM55 and DT55 are equipped with advanced engineering that enhances performance. The specially designed blades ensure effective tilling, allowing for optimal soil aeration and preparation. This not only aids in crop health but also enhances overall yields, making these implements a worthwhile investment for serious agricultural operations.

Another notable characteristic is their ease of use. The intuitive design of the DTM55 and DT55 allows for straightforward attachment and detachment, reducing downtime and enabling operators to quickly switch between tasks. This user-friendly approach is particularly beneficial for small-scale farmers and landscape professionals who need to maximize their productivity within tight schedules.

Moreover, maintenance is simplified, thanks to accessible grease points and a design that minimizes wear on components. Routine upkeep can be performed without the hassle, ensuring that the implements remain in optimal working condition throughout their lifespan.

Ultimately, the Land Pride DTM55 and DT55 models combine compatibility, durability, advanced technology, and ease of use, making them ideal choices for anyone looking to enhance their compact tractor’s performance. Whether for agricultural, landscaping, or general ground preparation tasks, these implements prove themselves as reliable allies in achieving agricultural success.