Land Pride DTM55, DT55, Powered Ditchers manual Table of Contents

Page 15

Land Pride

Table of Contents

Section 2: Operating Instructions

If your unit has an optional depth controlling skid shoe and if you have not already set it to the desired depth, you should set the tractor’s park brake, shut tractor engine off, remove switch key and then make that setting.

You are now ready to begin operation. Make sure the unit is lifted just barely off of the ground, raise the tractor engine rpm slightly above idle and engage the PTO. The best ditching performance is usually achieved at forward speeds of approximately 3 to 5 mph, so make the proper gear selection and then raise engine rpm to full PTO speed. Begin forward motion while gently lowering the Powered Ditcher into working position. You will immediately begin to see a generous stream of dirt being rapidly ejected off to the left side.

If you are not using a deflector shield, the dirt will usually be ejected outward and will spread evenly over the ground 20’ to 50’ out. If you are using a deflector shield to form a burm or terrace, now is the time to make sure your chute is correctly adjusted to achieve the desired results. After you have traveled approximately 50’, it is a good idea to lift the Powered Ditcher out of working position or soil contact, safely shut your equipment down, and go back to inspect the results. Then make required adjustments before continuing on.

If your ground conditions are extremely hard, you may find it necessary to employ an optional ripper attachment. If your ground conditions are too wet, you shouldn’t run at all until drier conditions prevail.

Remember to look back often. With a little practice you will gain the required experience you need to help you achieve the desired results you expect from your Land Pride 55 Series Powered Ditcher.

When you are done ditching, need to take a break, or just need to make a few adjustments to the Powered Ditcher, always remember to do the following:

•

•

•

•

•

•

•

Raise the Powered Ditcher up and out of soil contact

Reduce the tractor’s engine rpm

Disengage the PTO

Stop on level ground

Set the park brake

Turn off the engine

Remove the key

See “Features and Benefits” section or “Product Specifications” for additional information and performance enhancing options.

3/17/08

DT55 & DTM55 Powered Ditchers 324-053M

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Powered Ditchers Table of Contents Shutdown and Storage Important Safety InformationBe Aware Signal Words For Your ProtectionUse Safety Lights and Devices Practice Safe MaintenanceTransport Machinery Safely Keep Riders Off Machinery Prepare for EmergenciesWear Protective Equipment Avoid High Pressure Fluids HazardSafety Labels 818-719C 838-295C 838-287C838-381C 818-230C Chute Option 818-229C Chute OptionIntroduction Using This ManualApplication Owner AssistanceTractor Hook-Up Assembly and Set-UpTractor Requirements Driveline Set-UpTable of Contents Hydraulic Chute Option Assembly Manual Chute Option AssemblyRipper Option Assembly Skid Shoe Option AssemblyGauge Wheel Option Assembly General Operating Instructions Operating ChecklistTransporting Operating InstructionsTable of Contents Gauge Wheel Drive Chain AdjustmentRipper Depth Adjustment AdjustmentsHydraulic Chute Adjustment Manual Chute AdjustmentStorage MaintenanceDrive Chain Maintenance Maintenance & LubricationDrive Sprocket and Drive Chain Replacement Hours LubricationDriveline Shafts Driveline U-Joints Zerks Both EndsGauge Wheel Option Bearing Specifications & Capacities DTM55 Series Powered DitcherFeatures Benefits Features & BenefitsProblem Cause Solution Driveline Vibrates TroubleshootingTire Size Inflation Torque Values Chart For Common Bolt SizeTire Inflation Chart Appendix24 DT55 & DTM55 Powered Ditchers 324-053M Warranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 1 pages 9.16 Kb

Powered Ditchers, DT55, DTM55 specifications

Land Pride DTM55 and DT55 are powerful and versatile options for those in need of high-performance implements for their compact tractors. Designed for efficiency and durability, these models stand out in the market for their innovative features and robust construction.

One of the primary attributes of the DTM55 and DT55 series is their impressive compatibility with a wide range of compact tractors, allowing operators to maximize productivity across various applications. These models are engineered to handle tasks such as tilling, cultivating, and preparing seedbeds with ease. The adaptability to different tractors ensures that users can make the most of their equipment investment, enhancing overall efficiency on the field.

Both the DTM55 and DT55 feature a durable build, employing high-quality materials to withstand the demands of heavy-duty use. The robust frames and sturdy components provide resilience, ensuring these implements can tackle challenging terrain and tough working conditions. This durability is essential for farmers and landscapers who rely on their equipment day in and day out.

In terms of technology, the DTM55 and DT55 are equipped with advanced engineering that enhances performance. The specially designed blades ensure effective tilling, allowing for optimal soil aeration and preparation. This not only aids in crop health but also enhances overall yields, making these implements a worthwhile investment for serious agricultural operations.

Another notable characteristic is their ease of use. The intuitive design of the DTM55 and DT55 allows for straightforward attachment and detachment, reducing downtime and enabling operators to quickly switch between tasks. This user-friendly approach is particularly beneficial for small-scale farmers and landscape professionals who need to maximize their productivity within tight schedules.

Moreover, maintenance is simplified, thanks to accessible grease points and a design that minimizes wear on components. Routine upkeep can be performed without the hassle, ensuring that the implements remain in optimal working condition throughout their lifespan.

Ultimately, the Land Pride DTM55 and DT55 models combine compatibility, durability, advanced technology, and ease of use, making them ideal choices for anyone looking to enhance their compact tractor’s performance. Whether for agricultural, landscaping, or general ground preparation tasks, these implements prove themselves as reliable allies in achieving agricultural success.
Top Page Image Contents