Porter-Cable 6640, 902387 Specific Safety Rules and Symbols for Screwdrivers, Replacement Parts

902387 - 10-31-01.qxd 2/12/02 3:29 PM Page 4

SPECIFIC SAFETY RULES AND SYMBOLS FOR SCREWDRIVERS

1.VERIFY direction of rotation of screwdriver is correct for operation to be performed before starting tool.

2.DO NOT attempt to change direction of rotation while switch is “ON”. To do so may damage interlock feature built into switch. Be sure switch is “OFF” and motor has completely stopped.

3.SOME WOOD CONTAINS PRESERVATIVES WHICH CAN BE TOXIC. Take extra care to prevent inhalation and skin contact when working with these materials. Request, and follow, any safety information available from your material supplier.

4. WARNING: There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the tool until you have written Porter-Cable and we have advised you.

			Technical Service Manager
			Porter-Cable Corporation
			4825 Highway 45 North
SYMBOL			Jackson, TN 38305
			DEFINITION
	V		volts
	A		amperes
	Hz		hertz
	W		watts
	kW		kilowatts
	µF		microfarads
	l		liters
	kg		kilograms
	N/cm2		newtons per square centimeter
	Pa		pascals
	h		hours
	min		minutes
	s		seconds
		........................	alternating current
3		........................	three-phase alternating current
3N			three-phase alternating current with neutral
		........................	direct current
	n0		no load
		........................	alternating or direct current
			Class II Construction
		........................
		........................	splash-proof construction
		........................	watertight construction
	…/min		revolutions or reciprocation per minute

REPLACEMENT PARTS

When servicing use only identical replacement parts.

4