Porter-Cable 6645, 902387, 6641, 6642, 6640 instruction manual Abd

Page 7

902387 - 10-31-01.qxd 2/12/02 3:30 PM Page 7

B

A

Fig. 2

B

C

Fig. 3

3.Release adjusting collar being sure that the depressions in the collar engage the projections on the clutch housing.

4.Drive a test fastener in a piece of scrap material identical to that to be used. Examine results of drive and make additional depth stop adjustment if required as follows:

a)To increase depth of drive, repeat STEP 1 and turn adjusting collar so that end of nutsetter extends beyond end of depth stop.

b)To decrease depth of drive, repeat STEP 1 and turn adjusting collar so that end of depth stop extends beyond end of nutsetter.

Each 1/8 turn of the adjusting collar results in .010" change in depth of drive.

5.Repeat STEPS 3 and 4 until desired result is obtained.

C

ABD

Fig. 4

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Español Página Française Work Area General Safety RulesElectrical Safety Personal SafetyTools USE and Care ServiceReplacement Parts Specific Safety Rules and Symbols for ScrewdriversForeword Functional DescriptionMotor Extension Cord SelectionTo Change HEX Nutsetter Models 6641 To Adjust Depth Stop Models 6641ABD Driving SELF-DRILLING/TAPPING Screws Models 6640 To Adjust Depth Stop Models 6640To Change BIT Holder Models 6640 Driving Drywall Screws Models 6640Failure to Start MaintenanceKeep Tool Clean To Remove Screws ALL ModelsBrush Inspection and Lubrication Service and RepairsAccessories PORTER-CABLE Limited ONE Year Warranty Canadian PORTER-CABLE Delta Service Centers
Top Page Image Contents