Panasonic SC-EN25 Supplied accessories, Maintenance, Remote control, Placement of speakers

Supplied accessories

Use the numbers indicated in parentheses when asking for replacement parts.

(As of December 2005)

In U.S.A. to order accessories, refer to “Accessory Purchases” on page 8.

1 Remote control		2 Batteries
(N2QAGB000037)	SC-EN25/SC-EN26
(N2QAGB000038)	SC-EN27
1 AC power supply cord		1 FM/AM antenna
(RJA0065-1D)		(N1DADYY00003)

Note

The included AC power supply cord is for use with this unit only. Do not use it with other equipment.

Maintenance

To clean this unit, wipe with a soft, dry cloth.

•Never use alcohol, paint thinner or benzine to clean this unit.

•Before using chemically treated cloth, read the instructions that came with the cloth carefully.

The remote control

Batteries	1	3
		4	• Insert so the poles (+ and –)
		2	match those in the remote
			control.
			• Do not use rechargeable type
		(R6, AA)	batteries.

Use

Remote control signal sensor

•Aim at the sensor, avoiding obstacles, at a maximum range of 7 m directly in front of the unit.

•Operation can be affected by strong light sources, such as direct sunlight, and the glass doors on cabinets.

Care of the CD lens

•Clean the lens regularly to prevent malfunctions. Use a blower to remove dust and a cotton swab if it is extremely dirty.

Recommended product: Lens cleaner kit (part no. SZZP1038C).

•Do not use the lens cleaner of the CD type.

Placement of speakers

Place this unit in an area with more than 240 mm (9 7/16″) of vertical space.

The CD lid may become damaged if it cannot open completely.

Placement of speakers

Left and right speakers are exactly the same.

Note

•Keep your speakers at least 10 mm (13/32″) away from the system for proper ventilation.

•These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism.

•To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off.

Caution

•Use the speakers only with the recommended system. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

•Do not attach these speakers to walls or ceilings.

Connections

1 Speakers

2 FM/AM antenna

3 AC power supply cord

Before connecting, twist off the tip.

Copper (+)

		Silver (–)
Red		Silver (–)
	L	Copper (+)
Black
	2
Black
	R
Red
	1

Stand the antenna up on its base.

Taped part

FM antenna

AM antenna

Unplug the antenna connector by holding the taped part.

Connect the AC power supply cord only after all other connections have been made.

To household AC outlet

Conserving power

The unit consumes 2.0 W even when it is turned off with [POWER8]. To save power when the unit is not to be used for a long time, unplug it from the household AC outlet.

Remember to reset the radio stations and any other memory items before using the unit again.

Note

If the unit is left unplugged for longer than approximately two weeks, all settings will revert to the factory settings.

Portable audio equipment

(Cords and equipment not included.)

PHONES

Portable audio player	Plug type:
Use	3.5 mm (1/8″ )
	stereo
Remote control

SPEAKERS(6 )

L

R

FM/AMANTHAUT-PARLEURS

AC IN

MUSIC PORT	Start Playback from the
Select	Portable audio source.
“MUSIC P”

Note

•Adjust the volume and sound quality of this unit and the other equipment.

•For details, refer to the instruction manual of the other equipment.

Headphones

(Not included)

Reduce the volume before connection. Plug type: 3.5 mm (1/8″ ) stereo

Note

Avoid listening for prolonged periods of time to prevent hearing damage.

The socket outlet shall be installed near the equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable.

2