Panasonic SC-EN25 warranty Radio operations

Radio operations

Radio stations can be tuned manually by selecting the station’s frequency or they can be preset into channels to make it easy to tune. You can preset up to 20 FM channels and up to 12 AM channels.

			DISPLAY	OPEN/
				CLOSE
		SLEEP
		1	2	3
To adjust the volume		CLOCK/
		TIMER ADJ
		4	5	6	Input using the numbered
		TIMER
		SET/CHECK
		7	8	9	buttons
		PGM/CLEAR			To select a 2-digit number
			0	=>10
		-AUTO PRESET			e.g. 11: [	10] → [1] → [1]
0	50	MUSIC PORT
		TUNER/		CD
(Minimum)	(Maximum)
		BAND
					To adjust the volume
		VOL		VOL	SC-EN27SC-EN25/SC-EN26
		SOUND	LIVE	PLAY
		EQ	VIRTUALIZER MODE		uALBUM i	PRESET TUNE
		ALBUM
Allocation settings	Auto	Main unit
Each country allocates broadcast bands according to their particular system.	tuning

You can change the FM step. The step is factory-set to 0.2 MHz, but you can change it to receive broadcasts allocated 0.1-MHz steps.

Any FM frequencies preset in channels will be changed by this procedure. Preset them again.

1.Select the AM band with [TUNER/BAND].

2.Press and hold [TUNER/BAND] on the unit.

After a few seconds the display changes to show the current minimum frequency. Continue to hold the button down. The minimum frequency changes and the step is changed.

To return to the original step, repeat the above steps.

Note

The preset memory will be initialized when you change the frequency step.

Select “FM” or “AM”	Press and hold until the
	frequency starts changing
	rapidly
Remote control

TUNER/	3	4
BAND	u	i
Select “FM” or “AM”	Press and hold until the
	frequency starts changing

rapidly

•Auto tuning stops when it finds a station.

•To cancel auto tuning press the same button again.

Note

•Auto tuning may not function when there is excessive interference.

Perform once for FM stations and once for AM stations.

To improve reception

FM AM

Receive the radio stations after	Change the direction and location
connecting the antenna. Then
attach the antenna code on the wall	of the antenna.
or pillar in the good reception.

If noise is excessive in FM

You can improve FM reception by switching reception to monaural.

MONO

Press to turn the MONO

mode ON/OFF

Manual	Main unit
tuning

Select “FM” or “AM”	Select the frequency
Remote control

TUNER/	3	4
BAND	u	i
Select “FM” or “AM”	Select the frequency

4

Automatic presetting

The tuner presets the stations it can receive into channels in ascending order.

Manual presetting

Preset the stations one at a time.

Selecting channels

TUNER/

BAND

Select “FM” or “AM”	Press and hold until
	“AUTO” appears
Note

During automatic presetting, the memory indicator

( PGM ) flashes and the frequency scrolls. The memory indicator and channel numbers are displayed for a second when a station is preset.

The first station to be preset is displayed when presetting finishes.

Tune to the		Within 10 seconds
		1	2	3
signal you
want to		4	5	6
set as the		7	8	9
preset.	Enter preset mode		0	=>10
Note	PGM	Select a channel

The station occupying a channel is erased if another station is preset over that channel.

SC-EN27 SC-EN25/SC-EN26

Select “FM” or “AM” Select a channel

Select “FM” or “AM” Select a channel