SPECIFIC SAFETY RULES
1.Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
2.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•lead from
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
3.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
4.Keep hands away from all cutting edges and moving parts.
Symbology
Volts Direct Current
No Load Revolutions per Minute (RPM)
Properly Recycle Nickel
Cadmium Batteries
Specifications
Catalog | Volts | No Load | Bit Shank |
No. | DC | RPM | Size |
|
|
|
|
12 | 1/2" | ||
12 | 3/8" | ||
|
|
|
|
Canadian Standards Association
Underwriters Laboratories, Inc.
FUNCTIONAL DESCRIPTION
1. | Clutch adjusting ring | 1 | 2 | |
2. | Speed selector | |||
Cat. No. |
|
3.Release buttons
4.Battery pack
5.Trigger
6.Control switch
1 | 2 |
7. Keyless chuck |
|
7
6
5
7
6
5
Cat. No.
43
4 3
page 3