Genie TRUE, GPOWER 900, 1200, 1500 Programming Overview, Enters into and selects programming menus

Page 5

1OVERVIEW OF POWERHEAD CONTROLS

This section describes the simple programming functions. Use this page to familiarize yourself with the buttons and LED indicators used to program the opener.

NOTE: These and buttons are for programming use only. Do NOT use these buttons to operate the opener.

There are three programming buttons and two lights (LEDs) on the powerhead.

Each of the buttons are used to enter and complete the setup programming. The LEDs indicate status or a function change by illuminating ON, OFF, or ON flashing in one of three different colors: BLUE, RED, or PURPLE.

Begin here ONLY AFTER completing assembly and installation of the opener. Review the Assembly & Installation Poster to ensure all steps have

Facing

Garage Door

PROGRAM

 

 

Close Travel OpenTravel

ROUND LED

PROGRAM

Button

Indicator

 

 

 

LONG LED

SET

Indicator

 

Located on bottom of Powerhead.

been performed.

There are no assembly or installation steps included in this manual. Contact your Genie® Professional Dealer for an installation poster, if needed, or call 1-800 35-GENIE. You may also visit www.geniecompany.com to download

Enters into and selects programming menus.

SET

Multi-function; move door during programming & advance through menus

Both LEDs can be Red, Blue, Purple or off, depending on the programming step you are performing.

INFRARED PROTECTION FUNCTION

1.The Safe-T-Beam® has no effect on the door during an opening cycle.

2.If the Safe-T-Beam® detects an obstruction when trying to close the door, it will not allow the door to move.

3.When the garage door is closing, if Safe-T-Beam® is interrupted by person or obstacle, the garage door will stop its downward travel and reverse automatically to its fully opened position.

4.If the Safe-T-Beam® System fails, loses power, or is installed improperly, press and hold the wall console "open/close" button until the door reaches its fully closed position. If you release the "open/close" button on the wall console during the closing movement the door will reverse automatically to its fully opened position.

a pdf. file.

Before you begin Programming, check to make sure there are no objects in the garage

door opening.

Programming Overview

There are four Powerhead program menus:

Remote Program (Default menu)

Limits Program

Force Program*

Speed Program**

ADJUSTMENT OF FORCE & SPEED SETTINGS IS ON PAGE 10 IN THE MAINTENANCE & TROUBLESHOOTING SECTION.

*Force settings are set at the factory and do not normally require operator programming but can require minor adjustment under certain conditions.

See Troubleshooting.

**Speed settings are set at the factory and are self- adjusting when needed. Speed Settings do not normally require manually initiated changes.

9/2011

©2011 The Genie Company

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Screw Drive This page Left Blank Safety Information Opener Features Safety FeaturesEnters into and selects programming menus Programming OverviewKeep people clear of opening while door is moving Programming LimitsRed = IntelliCode 1 / Green = IntelliCode Default setting of Intellicode 2 must be changedFCC and IC Certified Follow the TOP 2 steps above to shift back to Intellicode2Wall Console Overview Indicator LightOpen/Close Button Independent Light Control ButtonDoor Balance Spring Tension Safe-T-Beam STB System CheckContact Reverse Test SeeReconnect power to door opener Corrective Maintenance Change Light BulbsReset OPEN/CLOSE Travel Limit Remote Battery ReplacementAdjustment Guide Speed Settings Adjustment Guide Force SettingsHowever, conditions possibly requiring adjustment are Doors with very stiff weather sealsReference Circuit Wiring Diagram Troubleshooting Guide Operation Normal operation None required Program remote using IntelliCodeLimits not set properly Reprogram Limits, see Component failure Technician
Related manuals
Manual 24 pages 32.79 Kb Manual 14 pages 3.79 Kb Manual 2 pages 38.69 Kb Manual 2 pages 21.44 Kb

1500, GPOWER 900, TRUE, 1200, POWERLIFT 900 specifications

The Genie TRUE, GPOWER 900, 1200, POWERLIFT 900, and 1500 are renowned products in the field of material handling, specifically designed to enhance efficiency and safety in various lifting applications.

The Genie TRUE is characterized by its innovative design that combines user-friendliness with advanced engineering. This model offers an impressive lift capacity while ensuring stability and performance. Its lightweight structure allows for easy maneuverability, making it ideal for both indoor and outdoor use. The Genie TRUE is equipped with a state-of-the-art control system that provides precise lifting, lowering, and positioning, ensuring maximum productivity for operators.

The GPOWER 900 and 1200 models stand out with their robust build and exceptional lifting capabilities. The GPOWER 900 is designed to handle loads up to 900 pounds, while the GPOWER 1200 can effortlessly lift up to 1200 pounds. Both models use advanced hydraulic systems for smooth operation, allowing for quick lifting cycles without compromising on power or safety. The ergonomic design of the GPOWER series minimizes operator fatigue, making it suitable for prolonged use in various work environments.

The POWERLIFT 900 and 1500 augment this lineup with their impressive features tailored for heavy-duty use. The POWERLIFT 900 can lift loads up to 900 pounds, making it ideal for medium-sized tasks. On the other hand, the POWERLIFT 1500 is engineered for heavier loads, boasting a capacity of 1500 pounds. Both models utilize cutting-edge overload protection technology, ensuring that safety is prioritized during use. Additionally, the POWERLIFT series features an intuitive interface that facilitates easy adjustments and control during operation.

Each of these models embodies the core values of Genie: reliability, innovation, and efficiency. They are designed to meet the varying demands of different industries, including construction, warehousing, and logistics. Their modular designs and interchangeable parts further enhance their versatility and longevity, making them a worthwhile investment for any business needing lifting solutions.

In summary, the Genie TRUE, GPOWER 900, 1200, POWERLIFT 900, and 1500 combine robust performance with safety and ease of use, making them ideal choices for any lifting task. Their reliability and advanced features are sure to meet the growing demands of modern workplaces.
Top Page Image Contents