Programming Limits | Genie GPOWER 900, TRUE, POWERLIFT 900, 1200, 1500

2PROGRAMMING LIMITS

WARNING

sMake sure doorway is in view and clear of obstacles and people to avoid injury or damage to property.

sDO NOT operate this unit from wall console before LIMITS and FORCE are set. Severe damage to the opener can occur.

sThe bullet MUST be engaged to carriage BEFORE setting limits. See Installation Poster (if provided) or call Customer Service at 800-35-GENIE or visit www.geniecompany.com.

NOTE: If bullet has NOT been engaged to the carriage, do so now. See page 9.

Please note that there is a 30 second timeout between each programming step.

If you see two flashing RED LEDs, you have initiated a timeout.

In the event of a timeout you must restart at beginning.

TRAVEL LIMITS

DOWN LIMIT

ACTION	LED INDICATION/RESULT
1	Long LED turns Blue, then flashes.
Press & hold
2 seconds or until	OFF	OFF
LEDs react. Release.	OFF	OFF
LEDs react. Release.	BLUE	FLASHING

2Press & hold

until door is fully		DOOR FULLY OPEN
closed. Then release.
3 Press &	PROGRAM	Both BLUE then LEDs Off confirms limit set.
Release.
	SET	BOTH FLASH BLUE		OFF
	SET	BOTH FLASH BLUE		OFF
		During the initial setting
		of the limits- the LEDs will		RED RED
		turn to RED—NOT OFF		RED RED
UP LIMIT
4		Long LED turns Blue,	Then Long LED OFF
Press & hold		Round LED OFF.	Round LED Flashing.
2 seconds or until		OFF		FLASHING
LEDs react. Release.		OFF		FLASHING
		ON	OFF

5Press & hold

	until door is fully		DOOR FULLY CLOSED
	open. Then release.
6	Press &	PROGRAM	Both BLUE then LEDs Off confirms limit set.
	Press &
	Release.
		SET	BOTH FLASH BLUE	OFF
		SET	BOTH FLASH BLUE	OFF

DOOR LIMITS ARE SET

SET FORCE NEXT

FORCE CONTROL

ACTION

INDICATION/RESULT

1ON WALL CONSOLE

	Press &	Door fully closes.
	Release
	Open/Close
	button.
	2	Door fully opens.
	Press &	Door fully opens.
	Press &
	Release
	Open/Close
	button.

FORCE CONTROL IS SET

CONTACT REVERSE TEST

WARNING

A moving door can cause serious injury or death.

1.Keep people clear of opening while door is moving.

2.Do NOT allow children to play with opener, including wall console, remote, or wireless keypad.

3.During programming, door opener could begin to run, so stay away from moving door and its parts.

The Force and Limit settings MUST be COMPLETED before performing Contact Reverse Test.

1. Test.

	ACTION	INDICATION/RESULT
	1
	Press &	DOOR OPENS.
	Release the	DOOR OPENS.
	Release the
	Open/Close
	button.
	2

Place a 2" x 4" board (laid flat) under center of door opening.

	3	DOOR CLOSES.
	Press &	DOOR CLOSES.
	Press &	s When door contacts board,
	Release the	it must stop and reverse direction
	Open/Close	(within 2 seconds) to the fully
	button.	open position.

2.Adjustment, if needed.

ssIf the door stops before it contacts the board

or it does not reverse, it may be due to an improperly set down limit. Repeat TRAVEL LIMITS program and Test again. Repeat as needed until door passes test. For further help refer to Maintenance &Troubleshooting, page 13.

Once the Contact Revese Test is complete, continue with programming Remotes.

9/2011

1500, GPOWER 900, TRUE, 1200, POWERLIFT 900 specifications

The Genie TRUE, GPOWER 900, 1200, POWERLIFT 900, and 1500 are renowned products in the field of material handling, specifically designed to enhance efficiency and safety in various lifting applications.

The Genie TRUE is characterized by its innovative design that combines user-friendliness with advanced engineering. This model offers an impressive lift capacity while ensuring stability and performance. Its lightweight structure allows for easy maneuverability, making it ideal for both indoor and outdoor use. The Genie TRUE is equipped with a state-of-the-art control system that provides precise lifting, lowering, and positioning, ensuring maximum productivity for operators.

The GPOWER 900 and 1200 models stand out with their robust build and exceptional lifting capabilities. The GPOWER 900 is designed to handle loads up to 900 pounds, while the GPOWER 1200 can effortlessly lift up to 1200 pounds. Both models use advanced hydraulic systems for smooth operation, allowing for quick lifting cycles without compromising on power or safety. The ergonomic design of the GPOWER series minimizes operator fatigue, making it suitable for prolonged use in various work environments.

The POWERLIFT 900 and 1500 augment this lineup with their impressive features tailored for heavy-duty use. The POWERLIFT 900 can lift loads up to 900 pounds, making it ideal for medium-sized tasks. On the other hand, the POWERLIFT 1500 is engineered for heavier loads, boasting a capacity of 1500 pounds. Both models utilize cutting-edge overload protection technology, ensuring that safety is prioritized during use. Additionally, the POWERLIFT series features an intuitive interface that facilitates easy adjustments and control during operation.

Each of these models embodies the core values of Genie: reliability, innovation, and efficiency. They are designed to meet the varying demands of different industries, including construction, warehousing, and logistics. Their modular designs and interchangeable parts further enhance their versatility and longevity, making them a worthwhile investment for any business needing lifting solutions.

In summary, the Genie TRUE, GPOWER 900, 1200, POWERLIFT 900, and 1500 combine robust performance with safety and ease of use, making them ideal choices for any lifting task. Their reliability and advanced features are sure to meet the growing demands of modern workplaces.