Black & Decker LI3100A instruction manual Features, Assembly, Use

Page 15
￿
￿
￿
￿
￿
￿
￿
￿
￿
￿
￿
￿
￿
￿
￿
￿
￿
￿

ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGE RS

Batteries

Never attempt to open for any reason.

Do not expose the battery to water.

Do not expose the battery to heat.

Do not store in locations where the temperature may exceed 40 °C.

Charge only at ambient temperatures between 10 °C and 40 °C.

Charge only using the charger provided with the appliance/tool.

When disposing of batteries, follow the instructions given in the section "Protecting the environment".

Do not damage/deform the battery pack either by puncture or impact, as this may create a risk of injury and fire.

Do not charge damaged batteries.

Under extreme conditions, battery leakage may occur. When you notice liquid on the batteries carefully wipe the liquid off using a cloth. Avoid skin contact.

￿ In case of skin or eye contact, follow the instructions below. Warning! The battery fluid may cause personal injury or damage to property. In case of skin contact, immediately rinse

with water. If redness, pain or irritation occurs seek medical attention. In case of eye contact, rinse immediately with clean water and seek medical attention.

Chargers

Your charger has been designed for a specific voltage. Always check that the mains voltage corresponds to the voltage on the rating plate.

Warning! Never attempt to replace the charger unit with a regular mains plug.

Use your Black & Decker charger only to charge the battery in the tool with which it was supplied. Other batteries could burst, causing personal injury and damage. Never attempt to charge non-rechargeable batteries.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

Have defective cords replaced immediately.

Do not expose the charger to water.

Do not open the charger.

Do not probe the charger.

The appliance/tool/battery must be placed in a well ventilated area when charging.

The charger is intended for indoor use only.

Read the instruction manual before use.

 

ENGLISH

 

Fail safe isolating transformer. The mains supply is

 

electrically separated from the transformer output.

 

The charger automatically shuts off if the ambient

 

temperature becomes too high. As a consequence

 

the charger will be inoperable. The unit must be

 

disconnected from the mains supply and taken to an

 

authorised service centre for repair.

FEATURES

1.

On/off switch

2.

Forward/reverse slider

3.

Bit holder

4.

LED light

Fig. A

5.

Charger

6.

Charger plug

ASSEMBLY

Fitting and removing a drill bit or a screwdriver bit

(fig. B)

This tool uses screwdriver bits and drill bits with a 6.35 mm

(1/4") hexagonal shank.

￿

To fit a bit, insert the bit shaft into the bit holder (3).

￿

To remove a bit, pull the bit shaft out of the bit holder (3).

USE

 

Warning! Let the tool work at its own pace. Do not

overload.

￿

Before first use, the battery must be charged for at least

 

9 hours.

Charging the battery (fig. C)

￿

Insert the charger plug (6) into the charger connector (7).

￿

Plug in the charger (5).

￿

Leave the tool connected to the charger for 12 hours.

The charger may hum and become warm while charging; this is normal and does not indicate a problem.

Warning! Do not charge the battery at ambient temperatures below 10 °C or above 40 °C.

Selecting the direction of rotation (fig. D)

For drilling and for tightening screws, use forward rotation. For loosening screws or removing a jammed drill bit, use reverse rotation.

￿ To select forward rotation, push the forward/reverse slider

(2) to the forward position.

￿ To select reverse rotation, push the forward/reverse slider

(2) to the rearward position.

￿ To lock the tool, set the forward/reverse slider into the centre position.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Cat. N LI3100 Español Português English FIG. a Finalidad Seguridad personalConserve el equilibrio en todo momento. Ello le Etiquetas sobre la herramienta Cargadores Consejos Para UN USO Óptimo CaracterísticasMontaje USOBaterías MantenimientoProtección DEL Medio Ambiente EspecificacionesUtilização Ferramenta elétrica aumenta o risco de choques ElétricosFerramenta, nem para retirar o plug da tomada Mantenha o cabo afastado de calor, óleo, cantosRótulos da ferramenta Em condições abusivas, o líquido pode ser liberadoDa pila evite o contato. Caso isso aconteça, passe Serviço Sua ferramenta elétrica só deve ser reparada porUtilize protetores auriculares com as chaves CarregadoresCarregador Ficha do carregador Acessórios MontagemUtilização Sugestões Para UMA MelhorEspecificações ManutençãoProteção do Meio Ambiente Informações DE ServiçoWhen operating a power tool outdoors, use an General power tool safety warningsElectrical safety Personal safetyLabel on your tool may include the following symbols Additio NAL Power Tool Safety Warning SFeatures AssemblyUSE Protecting the Environment AccessoriesMaintenance Hints for Optimum USECharger Service InformationBattery Screwdriver LI3100
Related manuals
Manual 32 pages 19.94 Kb

LI3100A specifications

The Black & Decker LI3100A is a versatile and powerful cordless handheld vacuum cleaner that has gained popularity among homeowners and cleaning enthusiasts alike. Engineered for convenience and efficiency, this model showcases an array of features designed to simplify cleaning tasks and enhance user experience.

At the heart of the LI3100A's design is its lithium-ion battery technology, which ensures a longer runtime and quicker charging compared to traditional nickel-cadmium batteries. With the ability to hold a charge longer and offer consistent suction power, users can count on its performance for extended cleaning sessions. The vacuum's lightweight design, weighing just around 3.5 pounds, enhances portability, allowing for easy maneuvering around the home, whether it's in tight corners or on elevated surfaces.

One of the standout features of the LI3100A is its strong suction capability, driven by a high-performance motor that effectively picks up dirt, debris, and pet hair from various surfaces. This makes it an excellent option for both carpets and hard floors, ensuring a thorough clean every time. The vacuum includes a washable dust bowl that holds 13.2 ounces of debris, making it easy to empty and maintain. The transparent design of the dust bowl allows users to see when it needs to be emptied, promoting a more efficient cleaning experience.

Another significant advantage of the LI3100A is its versatile cleaning attachments. It comes with a crevice tool for reaching tight spaces and a brush attachment for tackling upholstery and more delicate surfaces. These accessories enhance the vacuum's functionality, allowing users to adapt to various cleaning tasks, from tackling crumbs on kitchen counters to maintaining the cleanliness of furniture.

The vacuum also incorporates a smart charging base, which not only charges the vacuum but also serves as a convenient storage solution. This means the LI3100A is always ready for action, without the hassle of manual charging.

Overall, the Black & Decker LI3100A combines innovative technology with practical functionality, making it a valuable addition to any cleaning arsenal. Its powerful suction, lightweight design, and versatile attachments provide users with the tools they need to keep their spaces tidy with ease.
Top Page Image Contents