Hints for Optimum USE, Accessories | Black & Decker LI3100A instruction

ENGLISH
Drilling/screwdriving
	Select forward or reverse rotation using the forward/
	reverse slider (2).
To switch the tool on, press the on/off switch (1).
	To switch the tool off, release the on/off switch (1).
LED light
The LED light (4) is activated automatically when the trigger is
depressed. The LED will also illuminate when the trigger is
depressed and the forward/reverse slider				(2) is in the locked
off position (central position).
HINTS FOR OPTIMUM USE
Screwdriving
	Always use the correct type and size of screwdriver bit.
	If screws are difficult to tighten, try applying a small
	amount of washing liquid or soap as a lubricant.
Use the spindle lock to loosen very tight screws or to
	firmly tighten screws.
Always hold the tool and screwdriver bit in a straight line
	with the screw.
When screwing in wood, it is recommended to drill a pilot
	hole with a depth equal to the length of the screw. A pilot
	hole guides the screw and prevents splintering or
	distortion of the wood. For the optimum size of the pilot
	hole, refer to the table below.
When screwing in hardwood, also drill a clearance hole
	with a depth equal to half the length of the screw. For the
	optimum size of the clearance hole, refer to the table below.
Screw size		Pilot hole ø	Pilot hole ø	Clearance hole
		(softwood)	(hardwood)
Nº 6 (3,5 mm)		2,0 mm	2,5 mm	3,6 mm
Nº 8 (4 mm)		2,5 mm	3,0 mm	4,5 mm
Nº 10 (5 mm)		3,0 mm	3,5 mm	5,0 mm

Drilling

Always apply a light pressure in a straight line with the drill bit.

Just before the drill tip breaks through the other side of the workpiece, decrease pressure on the tool.

Use a block of wood to back up workpieces that may splinter.

Make an indentation using a centre punch at the centre of the hole to be drilled in order to improve accuracy.

ACCESSORIES

The performance of your tool depends on the accessory used. Black & Decker and Piranha accessories are engineered to high quality standards and designed to enhance the performance of your tool. By using these accessories you will get the very best from your tool.

This tool uses screwdriver bits with a 1/4" (6.35 mm) hexagonal shank. Piranha Super-lok accessories are designed for use with this tool.

MAINTENANCE

Your Black & Decker corded/cordless appliance/tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. Your charger does not require any maintenance apart from regular cleaning.

Warning! Before performing any maintenance on the tool, switch off and unplug the tool or remove the battery from the tool if the tool has separate battery. If the battery is integral, run the battery completely down. Unplug the charger before cleaning it.

Regularly clean the ventilation slots in your tool and charger using a soft brush or dry cloth.

Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.

Regularly open the chuck and tap it to remove any dust from the interior (when fitted).

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.

Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Batteries

At the end of their useful life, discard batteries with due care for our environment:

Do not short-circuit the battery terminals.

Do not dispose of the battery(s) in a fire as this may result in a risk of personal injury or an explosion.

Run the battery down completely, then remove it from the tool.

Batteries are recyclable. Place the battery(s) in a suitable packaging to ensure that the terminals cannot be short-circuited. Take them to any authorised repair agent or a local recycling station.

LI3100A specifications

The Black & Decker LI3100A is a versatile and powerful cordless handheld vacuum cleaner that has gained popularity among homeowners and cleaning enthusiasts alike. Engineered for convenience and efficiency, this model showcases an array of features designed to simplify cleaning tasks and enhance user experience.

At the heart of the LI3100A's design is its lithium-ion battery technology, which ensures a longer runtime and quicker charging compared to traditional nickel-cadmium batteries. With the ability to hold a charge longer and offer consistent suction power, users can count on its performance for extended cleaning sessions. The vacuum's lightweight design, weighing just around 3.5 pounds, enhances portability, allowing for easy maneuvering around the home, whether it's in tight corners or on elevated surfaces.

One of the standout features of the LI3100A is its strong suction capability, driven by a high-performance motor that effectively picks up dirt, debris, and pet hair from various surfaces. This makes it an excellent option for both carpets and hard floors, ensuring a thorough clean every time. The vacuum includes a washable dust bowl that holds 13.2 ounces of debris, making it easy to empty and maintain. The transparent design of the dust bowl allows users to see when it needs to be emptied, promoting a more efficient cleaning experience.

Another significant advantage of the LI3100A is its versatile cleaning attachments. It comes with a crevice tool for reaching tight spaces and a brush attachment for tackling upholstery and more delicate surfaces. These accessories enhance the vacuum's functionality, allowing users to adapt to various cleaning tasks, from tackling crumbs on kitchen counters to maintaining the cleanliness of furniture.

The vacuum also incorporates a smart charging base, which not only charges the vacuum but also serves as a convenient storage solution. This means the LI3100A is always ready for action, without the hassle of manual charging.

Overall, the Black & Decker LI3100A combines innovative technology with practical functionality, making it a valuable addition to any cleaning arsenal. Its powerful suction, lightweight design, and versatile attachments provide users with the tools they need to keep their spaces tidy with ease.

ENGLISH

Drilling/screwdriving

LED light