Black & Decker LI3100A Important Charging Notes, Charging Procedure Figure B

Page 6

90550370 LI3100.qxd 5/4/09 8:00 AM Page 6

10.Do not attempt to open the charger. There are no customer serviceable parts inside. Return to any authorized Black & Decker service center.

11.DO NOT incinerate the tool or batteries even if they are severely damaged or completely worn out. The batteries can explode in a fire. Toxic fumes and materials are created when lithium ion battery packs are burned.

12.Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery from the charger may ignite the dust or fumes.

13.If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for three minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.

WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame.

Charging Procedure

CHARGING PROCEDURE - FIGURE B

IMPORTANT: The batteries in your tool are not fully charged at the factory. Before attempting to charge them, thoroughly read all of the safety instructions.

(1)The charging socket (5) is keyed to lock out other chargers. Align the tab in the charger plug (6) with the key in the charging socket.

(2)Plug the charger output plug (6) into the charging socket (5) of the tool as shown in figure B.

(3)Plug the charger (7) into any standard 120 Volt 60 Hz electrical outlet.

(4)Let the tool charge initially for at least 12 hours. After the initial charge, your tool should be fully charged in 12 hours from a fully discharged condition. Recharge discharged batteries as soon as possible after use or

battery life may be greatly diminished. For

B

longest battery life, do not discharge

 

batteries fully. It is recommended that the

 

batteries be recharged after each use.

 

WARNING: Do not use tool while it is

 

connected to the charger.

 

WARNING: Fire Hazard. When

 

disconnecting the charger from the tool, be

 

sure to unplug the charger from the outlet

5

first, then disconnect the charger cord from

the tool.

 

Important Charging Notes

 

1. Your tool was sent from the factory in an

6

uncharged condition. Before attempting to

use it, it must be charged for at least 12

 

hours.

 

2.CAUTION: To reduce the risk of damage to the batteries, NEVER charge them in an

air temperature below 40°F (4,5°C) or above 105°F (40,5°C). Also, NEVER charge them if the battery temperature is below 40°F (4,5°C) or above 105°F (40,5°C). Longest life and best performance occurs when batteries are charged with an air temperature of approximately 75°F (24°C).

3.While charging, the charger may hum and become warm to touch. This is a normal condition and does not indicate a problem.

4.If the batteries do not charge properly—(1) Check current at receptacle by plugging in a lamp or other appliance. (2) Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights. (3) Check that the charger plug is fully inserted into the charger port on the tool. (4) If the receptacle is OK, and you do not get proper charging, take or send the tool and charger to your local Black & Decker service center. See Tools Electric in yellow pages.

5.The tool should be recharged when it fails to produce sufficient power on jobs which were easily done previously. Battery life may be greatly diminished if batteries are discharged deeply. DO NOT CONTINUE using product with its batteries in a depleted condition. Recharge discharged batteries promptly.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents LITHIUM-ION Screwdriver VEA EL Español EN LA ContraportadaGeneral Power Tool Safety Warnings Work area safetySpecific Safety Rules Wire Size AWG SymbolsRecommended Minimum Wire Size for Extension Cords Total Length of CordSafety Warnings and Instructions Batteries Safety Warnings and Instructions ChargingCharging Procedure Charging Procedure Figure BImportant Charging Notes Safety Warnings and Instructions Drilling LED Light MaintenanceBattery Removal and Disposal DrillingPossible Solution TroubleshootingProblem Possible Cause AccessoriesSee ‘Tools-Electric’ Yellow Pages For Service & Sales Mode D’EMPLOI Une distraction pourrait vous en faire perdre la maîtrise Contrôler Règles DE Sécurité Spécifiques Toujours Porter UN Équipement DE Protection HomologuéAvertissements de sécurité et directives chargement SymbolesAvertissements de sécurité et directives bloc-piles Calibre AWGProcédure de charge Procédure DE Charge Figure BAvertissements de sécurité et directives perçage Remarques importantes sur le chargementAssemblage ET Réglage Insertion ET Retrait DES Embouts Figure CFonctionnement Entretien Solution possibleDépannage Retrait ET Élimination DES PilesAccessoires Information SUR LES RéparationsManual DE Instrucciones 90550370 LI3100.qxd 5/4/09 800 AM 90550370 LI3100.qxd 5/4/09 800 AM Normas DE Seguridad Específicas Pautas DE SEGURIDAD/DEFINICIONESInstrucciones y advertencias de seguridad Baterías Instrucciones y advertencias de seguridad cargaSímbolos Procedimiento de carga Procedimiento DE Carga Figura BInstrucciones y advertencias de seguridad taladrado Notas importantes sobre la cargaEnsamblaje Y Ajuste Inserción Y Remoción DE Puntas Figura CInstrucciones DE Operación Detección de problemas MantenimientoRemoción Y Eliminación DE LA Batería Accesorios MERIDA, YUC CULIACAN, SINMEXICO, D.F MONTERREY, N.LPara Servicio y ventas
Related manuals
Manual 17 pages 56.18 Kb

LI3100A specifications

The Black & Decker LI3100A is a versatile and powerful cordless handheld vacuum cleaner that has gained popularity among homeowners and cleaning enthusiasts alike. Engineered for convenience and efficiency, this model showcases an array of features designed to simplify cleaning tasks and enhance user experience.

At the heart of the LI3100A's design is its lithium-ion battery technology, which ensures a longer runtime and quicker charging compared to traditional nickel-cadmium batteries. With the ability to hold a charge longer and offer consistent suction power, users can count on its performance for extended cleaning sessions. The vacuum's lightweight design, weighing just around 3.5 pounds, enhances portability, allowing for easy maneuvering around the home, whether it's in tight corners or on elevated surfaces.

One of the standout features of the LI3100A is its strong suction capability, driven by a high-performance motor that effectively picks up dirt, debris, and pet hair from various surfaces. This makes it an excellent option for both carpets and hard floors, ensuring a thorough clean every time. The vacuum includes a washable dust bowl that holds 13.2 ounces of debris, making it easy to empty and maintain. The transparent design of the dust bowl allows users to see when it needs to be emptied, promoting a more efficient cleaning experience.

Another significant advantage of the LI3100A is its versatile cleaning attachments. It comes with a crevice tool for reaching tight spaces and a brush attachment for tackling upholstery and more delicate surfaces. These accessories enhance the vacuum's functionality, allowing users to adapt to various cleaning tasks, from tackling crumbs on kitchen counters to maintaining the cleanliness of furniture.

The vacuum also incorporates a smart charging base, which not only charges the vacuum but also serves as a convenient storage solution. This means the LI3100A is always ready for action, without the hassle of manual charging.

Overall, the Black & Decker LI3100A combines innovative technology with practical functionality, making it a valuable addition to any cleaning arsenal. Its powerful suction, lightweight design, and versatile attachments provide users with the tools they need to keep their spaces tidy with ease.
Top Page Image Contents