Chicago Electric 9624 operating instructions Save This Manual, General Power Tool Safety Warnings

Page 2

Save This Manual

Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Important SAFETY

Information

In this manual, on the labeling, and all other information provided with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if not avoided, will result

in death or serious injury.

WARNING indicates a hazardous situation

which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert

symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not

related to personal injury.

CAUTION, without the safety alert symbol, is

used to address practices not related to personal injury.

General Power Tool Safety Warnings

WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term ″power tool″ in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1.Work area safety

a.Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c.Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2.Electrical safety

a.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

b.Avoid body contact with grounded surfaces such as pipes, radiators,

Page 2

For technical questions, please call 1-800-444-3353.

SKU 9624

Image 2
Contents For technical questions or replacement parts, please call Electric Drywall ScrewdriverSave all warnings and instructions for future reference General Power Tool Safety WarningsSave This Manual Any power tool that cannot be controlled Screwdriver and Impact Wrench Safety Warnings Vibration Safety See 3-Prong Plug and Outlet GroundingOutlet Prong Plug and Outlet25’ 50’ 75’ 100’ 150’ Extension CordsSee Table a Unpacking SpecificationsAssembly Instructions To Change Bit Tip HoldersSee Figure B Operating InstructionsTo Change The Bit SKU For technical questions, please callDo not use damaged equipment INSPECTION, Maintenance CleaningPlease Read Following Carefully Parts List and Diagram Part DescriptionLimited 90 DAY Warranty Record Product’s Serial Number Here