®To preserve naturalresources,please recycleor disposeof properly.
This product contains
BATTERY REMOVAL, PREPARATION FOR RECYCLING
See Figum &
TO REMOVE:
MOTOR HOUSING
•Lock switch trigger by placing the forward/reverse switch in center position. See Figure 4.
•Remove cover securing batteries by depressing and pushing cover in the direction of the arrow as shown in figure 8.
•Slide batteries from motor housing enough to expose leads and battery terminals. Disconnect leads from battery terminals.
Note: Be careful not to break battery terminals when disconnecting leads.
_. WARNING: Upon removal, cover the battery's terminals with heavy dutyadhesive tape. Do not
attempt to destroy or disassemble battery or remove any of its components.
may result. Keep away from children. Failure to comply with these warnings could result in fire
and/or serious injury.
WHEN SERVICING, USE ONLY IDENTICAL
Key Part
No. NumberDescription
Battery Charger
(Item No.
BATTERY
BATTERIES
BATTERY
TERMINALS
COVERF_g. 8
CRAFTSMAN REPLACEMENT PARTS
* Can Be Purchased Thru RSOS (Retail Special Order System)
11