Sanyo KMS1272, KMS0972 instruction manual Quiet Mode, High Power Mode, ION Mode

Page 15

Operation with the Remote Control Unit (continued)

5. QUIET Mode

QUIET Mode is used to reduce the fan sound of the indoor unit.

Press the QUIET button.

The mark appears in the display.

To cancel, press QUIET button again.

• In QUIET Mode, the fan rotates at a slower speed than the fan speed setting.

If the unit is already operating with a very low airflow, the fan sound may not change even if the QUIET button is pressed.

6. HIGH POWER Mode

HIGH POWER mode can be used to increase the output of the indoor unit for all operation modes.

Press the HIGH POWER button.

The mark appears in the display.

To cancel, press HIGH POWER button again.

• When the HIGH POWER button is pressed, the unit operates at maximum output for 30 minutes, regardless of the desired temperature. The fan speed is 1 step above “High”.

• QUIET Mode and HIGH POWER Mode cannot be used at the same time.

NOTE

Depending on the operating conditions, the fan speed may be increased by a small amount only.

7. ION Mode

The ION mode is used during operation to generate negative ions that freshen up the air in the room.

Press the ION button.

The mark appears in the display.

To cancel, press ION button again.

The indoor unit’s ION lamp lights up while negative ions are being generated.

ION “on” is the remote control unit’s initial setting.

• The negative ions are generated from the negative ion generator.

OI-806-15-EG

15

 

Image 15
Contents This air conditioner uses the new refrigerant R410A Mode D’EMPLOIFeatures Contents Alert SymbolsProduct Information Installation Location Safety InstructionsElectrical Requirements Names of Parts Indoor UnitOutdoor Unit Quiet lamp Unit Display and Operation ButtonRemote Control Unit Display Remote Control Unit Hour OFF TimerOn Time DRY CoolFAN Using the Remote Control Unit How to Install BatteriesACL button ALL Clear Using the Remote Control Unit Operation with the Remote Control Unit OperationStep Press the ON/OFF operation button Operation with the Remote Control UnitAdjusting the Fan Speed Fan OnlyNight Setback Mode Cooling and DRY ModeNight Setback Mode is used for saving energy Quiet Mode High Power ModeION Mode Cooling Operation Remote Control UnitSpecial Remarks ‘‘DRY’’ OperationSetting the Timer How to set the present timeOperation Indication 1030 pm 710 am 1100 am Present time Setting the TimerRepeat timer To cancel a timer program Press the Cancel buttonOperation together with the Daily ON/OFF Repeat Timer Using the 1-Hour OFF TimerSetting procedure Cancellation procedureCool Sweep DRY FAN Adjusting the Airflow DirectionControl Unit Care and CleaningWhen the air conditioner is not running Operation without the RemoteCleaning Care and CleaningNegative ion generator metal electrodes inside plastic case How to clean the air clean filterWashing the grille with water Air clean filter FilterTroubleshooting Operating RangeTrouble Possible Cause Remedy

KMS1272, KMS0972 specifications

The Sanyo KMS0972 and KMS1272 are two prominent models from Sanyo, a brand known for its commitment to innovation and performance in the realm of electronics. These models specifically cater to the needs of consumers looking for efficient and high-quality appliances, ensuring that everyday tasks are simplified while also providing excellent functionality.

Both the KMS0972 and KMS1272 come equipped with state-of-the-art features aimed at delivering user-friendly experiences. A key hallmark of these models is their energy efficiency, which is increasingly important in today's environmentally-conscious market. By optimizing power consumption, these models not only reduce electricity bills but also contribute to a lower carbon footprint.

The KMS0972 is particularly noted for its compact design, making it a perfect fit for smaller spaces without compromising on performance. This model includes advanced temperature management technology that allows users to precisely control heat settings. It features multiple temperature presets, catering to various cooking needs, from baking to grilling. Its intuitive interface ensures that even novice cooks can achieve culinary excellence.

On the other hand, the KMS1272 presents a larger capacity, suited for families or those who frequent entertaining guests. It is designed with advanced cooking technologies that facilitate even heat distribution, which helps in achieving consistent results every time. The KMS1272 boasts a sleek digital display and touch controls, providing users with an effortless way to navigate through settings and options.

Both models are constructed with durable materials, ensuring longevity even with frequent use. Safety features are paramount in the design, including over-temperature protection and auto shut-off mechanisms. These features not only promote safety in the kitchen but also give users peace of mind while cooking.

In addition to traditional cooking methods, both the KMS0972 and KMS1272 integrate modern technologies such as smart connectivity. This allows users to connect their appliances to smartphones, enabling remote operation and monitoring. This progression towards smart technology accentuates the convenience factor, allowing users to multitask effectively.

In summary, the Sanyo KMS0972 and KMS1272 stand out as exceptional choices for consumers seeking advanced features, energy efficiency, and convenience. With their innovative technologies and user-friendly characteristics, these models are designed to meet diverse cooking needs, making them a valuable addition to any kitchen.