Kodak 9500, 990 Technical Information, Installation, Acoustical emissions, Cabling requirements

Page 26

Technical Information

 

Further information regarding any of the topics presented here is provided

 

in Installation Planning and System Maintenance Guide (A-61000).

Installation

This equipment and accessories are installed by a Kodak Field Engineer

 

and takes approximately 4 hours.

Acoustical emissions

Scanner 990 — Acoustical emissions shall be less than or equal to 67 dB

 

during operation and less than or equal to 62 dB while idle.

 

Scanner 9500 — Acoustical emissions shall be less than or equal to 76 dB

 

during operation and less than or equal to 67 dB while idle.

Cabling requirements

The customer/system integrator must provide the SCSI cable used to

 

connect the equipment and host computer. It is not included with the

 

Scanner 9500 or Scanner/Microimager 990.

Electrical and operating requirements

This equipment is manufactured to operate within one of the following sets of power constraints or configured to do so by your Kodak Field Engineer:

 

Voltage

Hz/Cycles

Amps 9500

Amps 990

 

 

 

 

90 -110 V ac

50/60 Hz

15 amps

15 amps

 

 

1 phase

@ 100 V ac

@ 100 V ac

 

 

 

 

 

104

-127 V ac

60 Hz

12 amps

12 amps

 

 

1 phase

@ 120 V ac

@ 120 V ac

198

- 254 V ac

50 Hz

6 amps

10 amps

 

 

1 phase

@ 220-240 V ac

@ 220-240 V

 

 

 

 

ac

A separate, dedicated power line with one duplex receptacle is required for each Scanner.

Two outlets are required:

One individual dedicated branch AC circuit employing one standard 3-prong, grounded duplex outlets. These outlets are designated for the machine and service diagnostic equipment.

The outlets should meet the following standards:

Image 26
Contents Product Information Kodak Digital Science Document Scanner Product descriptionFeatures and benefits ∙ Check Feeder Optional accessories∙ Advanced Document Controller detects document overlap ∙ Check StackerKodak Digital Science Document Scanner/Microimager With equipment operation keys, standard function keys Optional accessories ∙ Workstation Side Console Scanning capabilities Feature Scanner Scanner/Microimager SpeedProduct Comparison Matrix Microfilming capabilitiesFeeder/Stacker options Maximum feed heightMaximum stack height Optional capabilitiesFeature Scanner Scanner/Microimager Contents Image Processing CapabilitiesEquipment Dimensions Integration SoftwareSample Equipment Configuration Application Samples and SolutionsRequirement Solution Transportation Freight and waybill processingInsurance Claims processing Requirement Solution Government Land records processing New equipment Catalog 9500 990 AccessoryEquipment, Software, Parts, Tools and Supplies Mainframe Catalog NumberDesired Functionality Required Accessories Catalog # ScannerMode Setup Software Catalog # Upgrade equipmentFrom Required Accessory Catalog # SoftwareUnited States and Canada Parts and toolsPart/Tool Film supplies Accessory suppliesSupplies Supply Catalog #Imaging Station Lamps Supply Catalog # EndorserDocument Scanning Array Lamps Supply Catalog # Code # Description PublicationsAvailable publications United States and Canada Performance and Standards Agency approvalsAcoustical emissions InstallationTechnical Information Cabling requirementsVoltage requirements AC power quality and conditioning Environmental requirements Dimensions and weightScanner Height Width Depth Weight Humidity DissipationDays and hours of coverage Warranty repair coverageHow to obtain service Customer responsibilitiesWarranty repair Customer/end user responsibilitiesPage On-site response time Service agreement availabilityService agreement coverage Billing and terms of payment CancellationRenewal AssignmentResponse times Distance From Within Outside Support Resource Contract HoursBilling of terms and payment Page Eastman Kodak Company
Related manuals
Manual 10 pages 27.14 Kb Manual 101 pages 52.87 Kb

9500, 990 specifications

The Kodak 9500 is a sophisticated imaging device designed to revolutionize the way professionals engage with photography and imaging technologies. This innovative product combines cutting-edge technology with user-friendly features to enhance the overall shooting experience, making it a top choice among photographers and videographers alike.

One of the standout features of the Kodak 9500 is its high-resolution sensor, which captures images in stunning detail. With a resolution of up to 50 megapixels, this camera allows photographers to produce exceptionally sharp and vibrant photos, making it an ideal choice for commercial photography, fine art, and even landscape photography. The larger pixel size ensures better performance in low-light conditions, allowing for clearer images without the noise that often plagues other cameras.

The Kodak 9500 also boasts an advanced autofocus system. This system employs phase detection technology, ensuring that subjects are locked in focus quickly and accurately, even in dynamic environments. Whether capturing fast-moving wildlife or bustling street scenes, users can rely on the camera's autofocus capabilities to deliver crisp, clear results every time.

Another key feature of the Kodak 9500 is its versatility in terms of shooting modes. The camera offers a wide range of options, including manual, aperture priority, and shutter priority modes. Additionally, the inclusion of various scene modes enables users to achieve optimal results regardless of their level of expertise. This makes the Kodak 9500 accessible to both beginners and seasoned photographers.

In terms of connectivity, the Kodak 9500 incorporates built-in Wi-Fi and Bluetooth technology, allowing for easy sharing of images and videos. Photographers can transfer their work directly to smartphones or tablets and share them on social media platforms without the need for additional software or wires. This seamless connectivity enhances the workflow for professionals who need to present their work quickly.

The build quality of the Kodak 9500 is another aspect worth mentioning. Constructed with a durable magnesium alloy body, the camera is designed to withstand the rigors of professional use. It is also weather-sealed, making it resistant to moisture and dust, allowing photographers to work confidently in various environmental conditions.

In summary, the Kodak 9500 stands out in the crowded camera market with its high-resolution capabilities, advanced autofocus system, versatile shooting modes, and robust connectivity options. Its durable construction makes it a reliable tool for professionals seeking to capture their vision with precision and clarity. Whether you are a seasoned pro or a passionate enthusiast, the Kodak 9500 is an exceptional choice that elevates the art of photography.