ASSEMBLY
1. TOOLS REQUIRED FOR ASSEMBLY
Item | Description | Qty. |
| Phillips Screwdriver | 1 |
| Adjustable Wrench | 1 |
| Square | 1 |
2. UNPACKING AND CHECKING CONTENTS
Model
A. Separate all parts from carton and check each item with Carton Contents list below to make sure all items are accounted for, before discarding any packing material.
B. Remove the protective oil that is applied to the table. Use any ordinary household type grease and spot remover.
C. Apply a coat of paste wax to the table to prevent rust. Wipe all parts thoroughly with a clean dry cloth.
CARTON CONTENTS |
| |
Item | Description | Qty. |
A | Main Machine w/Blade Installed | 1 |
B | Table | 1 |
C | Package Containing Open Stand | 1 |
D | Bag of Loose Parts for Main Machine | 1 |
E | Upper Table Trunnion Assembly | 1 |
F | Bag of Loose Parts for Stand | 1 |
G | Operator’s Manual | 1 |
LIST OF LOOSE PARTS IN BAG |
| |
Item | Description | Qty. |
| 1 | |
| Hex Socket head cap screw M6x12 | 2 |
| Washer 6 | 2 |
| Blade tension knob | 1 |
| Crank handle | 1 |
| Hex Nut M6 | 2 |
| Hex Bolt M8x35 | 1 |
| Hex Nut M8 | 1 |
| Wing nut M6 | 1 |
| Tube | 1 |
| Washer 6 | 1 |
| Hex Socket head cap screw M6x45 | 1 |
| Tool holder | 1 |
| Pan head screw M5x10 | 2 |
| M2.5 Hex “L”Wrench | 1 |
| M3 Hex “L” wrench | 1 |
| M4 Hex “L” wrench | 1 |
| M5 Hex “L” wrench | 1 |
| Hex Bolt, washer, nut assembly M8 | 24 |
| Hex Bolt, washer, nut assembly M6 | 4 |
| Rubber foot | 4 |
| Hex Bolt M8x16 | 4 |
| Lock washer 8 | 4 |
B
D
F
14” Bandsaw w/Open Stand
Model:
Owner’s Manual
Record the serial number and date of purchase
in your manual for future reference.
| Serial number: |
|
|
| Date of purchase: |
| For more information: |
|
|
| |
| www.rikontools.com or info@rikontools.com | ||
|
| For Parts or Questions: | |
Part | techsupport@rikontools.com or | ||
AC
EG
5