MAINTENANCE
WARNING: To avoid injury due to unexpected starting, before cleaning or carrying out maintenance work, switch off and disconnect the band saw from the power source.
Never use water or other liquids to clean the band saw. Use a dry brush.
Regular maintenance of the band saw will prevent unnecessary problems.
A. Keep the table clean to ensure accurate cutting.
B. Keep the outside of the machine clean to ensure accurate opera- tion of all moving parts and prevent excessive wear.
C. Keep the ventilation slots of the motor clean to prevent it from overheating.
D. Keep the inside (near the saw blade, etc.) clean to prevent accumulation of dust (See FIG. 29 & 30). Use dust collection if pos- sible.
E. To prolong the life of the saw blade, when the band saw is not in use for extended periods, release the saw blade tension. Before reusing the band saw ensure that the blade is
FIG. 29
Keep Inside Areas Clean
FIG. 30
Keep Inside Areas Clean
ELECTRICAL SCHEMATIC
WARNING: This machine must be grounded. To avoid electrocution or fire, any repairs to electrical system should be done only by a qualified electrician, using genuine replacement parts.
13