___________________________________________________________________________________________________________________________________________________________________________________
Figure 6.2
1 Segment
2 Body of blade
3 Fixing hole
NOTE!
The diamond segments must be wider than the body of the blade.
Figure 7.2
Figure 7.2. Parking brake applied
Figure 7.3
7.Lifting and transporting the floor saw
The FS800 E/EM floor saw is fitted with a parking brake, see figures 7.2 and 7.3, which must be applied when the saw is not in use and when it is being transported. The floorsaw also has a lifting eye, figure 7.1, which must be used when lifting the machine. Dont lift using any other parts, as this could
cause damage to the machine and personal injury. If using
a lifting strap, attach it to the lifting eye so that the mach- Figure 7.3. Parking brake released ine cannot tip over during lifting. When transporting the floor
saw, apply the parking brake and use anchor straps or the like to prevent it from moving about.
Figure 7.1
1
8. Troubleshooting
WARNING! Before attempting to fix a fault you must make sure that the power cables are disconnected to prevent the machine from starting up while you are working.
If there is a fault with the machine check first whether it matches any of the faults described in the troubleshooting chart below.
If you cannot localise the fault and it does not match any of the faults described in the troubleshooting chart you should contact your supplier for additional information.
7.1.1. Lifting eye
9