Husqvarna K1250 manual KEY to Symbols, Key to symbols

Page 2

KEY TO SYMBOLS

Key to symbols

WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

Protective helmet

Hearing protection

Protective goggles or a visor

Breathing mask

WARNING! Dust forms when cutting, this can cause injuries if inhaled. Use an approved breathing mask. Avoid inhaling petrol fumes and exhaust fumes. Always provide for good ventilation.

WARNING! Sparks from the cutting blade can cause fire in combustible materials such as: petrol (gas), wood, dry grass etc.

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

Run position.

Stop, with the return spring to the operating position.

Stop, in the fixed position.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

2 – English

Image 2
Contents K1250 EnglishKEY to Symbols Key to symbolsContents What is WHAT? What is what on the power cutter?Safety Instructions Personal protective equipmentVibration damping system Machine′s safety equipmentStop switch MufflerGuard is fitted correctly before starting the machine Throttle lockoutGuard for the blade Transport and storage General safety precautionsChecking the blade guard General working instructions Fuel safetyBasic safety rules Refuelling/Fuel mixture/StorageCutting technique CuttingGeneral Sharpening diamond bladesGeneral How to avoid kickbackCutting blades Diamond blades for wet cutting Abrasive discsDiamond blades Diamond blades for dry cuttingChecking the drive axle and flange washers AssemblyAssembling the cutting head Fitting the cutting bladeFueling Fuel HandlingFuel Starting and Stopping Starting and stoppingReplacing the drive belt MaintenanceTensioning the drive belt Belt pulley and clutchAir filter Fine adjustment of the idle speed TFuel filter Tensioning the recoil spring StarterChanging a broken or worn starter cord Changing a broken recoil springMuffler Spark plugCooling system Weekly maintenance General maintenance instructionsDaily maintenance Monthly maintenanceTechnical Data Cutting equipmentFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsPage 1150292-95 ´z+R==¶5X¨ ´z+R==¶5X¨