Husqvarna K1250 manual Throttle lockout, Guard for the blade

Page 7

SAFETY INSTRUCTIONS

Throttle lockout

The throttle trigger lock is designed to prevent accidental operation of the throttle. When the lock (A) is pressed in this releases the throttle (B).

A

B

The trigger lock remains pressed in as long as the throttle is pressed. When the grip on the handle is released the throttle trigger and the throttle trigger lock both return to their original positions. This is controlled by two independent return spring systems. This means that the throttle trigger is automatically locked in the idle position.

Guard for the blade

WARNING! Always check that the blade

!guard is fitted correctly before starting the machine.

This guard is fitted above the cutting blade and is designed to prevent parts of the blade or cutting fragments from being thrown towards the user.

Checking, maintaining and servicing the machines safety equipment

WARNING! All servicing and repair work on

!the machine requires special training.This is especially true of the machines safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent.

Vibration damping system

Regularly check the vibration damping units for cracks or deformation.

Make sure the vibration damping units are securely attached to the engine unit and handle unit.

Stop switch

Start the engine and make sure the engine stops when you move the stop switch to the stop setting.

Muffler

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to the machine.

English – 7

Image 7
Contents English K1250Key to symbols KEY to SymbolsContents What is what on the power cutter? What is WHAT?Personal protective equipment Safety InstructionsMuffler Machine′s safety equipmentStop switch Vibration damping systemGuard for the blade Throttle lockoutGuard is fitted correctly before starting the machine Checking the blade guard General safety precautionsTransport and storage Refuelling/Fuel mixture/Storage Fuel safetyBasic safety rules General working instructionsSharpening diamond blades CuttingGeneral Cutting techniqueCutting blades How to avoid kickbackGeneral Diamond blades for dry cutting Abrasive discsDiamond blades Diamond blades for wet cuttingFitting the cutting blade AssemblyAssembling the cutting head Checking the drive axle and flange washersFuel Fuel HandlingFueling Starting and stopping Starting and StoppingBelt pulley and clutch MaintenanceTensioning the drive belt Replacing the drive beltFuel filter Fine adjustment of the idle speed TAir filter Changing a broken recoil spring StarterChanging a broken or worn starter cord Tensioning the recoil springCooling system Spark plugMuffler Monthly maintenance General maintenance instructionsDaily maintenance Weekly maintenanceCutting equipment Technical DataYour Warranty Rights and Obligations Federal Emission Control Warranty StatementPage 1150292-95 ´z+R==¶5X¨ ´z+R==¶5X¨