Makita 5046DWB, 5036DWB, 5026DWB, 5026DB Additional Safety Rules For Charger & Battery Cartridge

Page 10

ADDITIONAL SAFETY RULES

FOR CHARGER & BATTERY CARTRIDGE

1.Do not charge Battery Cartridge when temperature is BELOW 10°C (50OF) or ABOVE 4OoC (104OF).

2.Do not attempt to use a step-up transformer, an engine generator or DC power receptacle.

3.Do not allow anything t o cover or clog the charger vents.

4.Always cover the battery terminals with the battery cover when the battery cartridge is not used.

5.A battery short can cause a large current flow, overheating, possible burns and even a breakdown.

(11 Do not touch the terminals with any conductive material.

(2)Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.

(3)Do not expose battery cartridge t o water or rain.

6.Do not store the tool and Battery Cartridge in locations where the tempera- ture may reach or exceed 5OoC (122OF).

7.Do not incinerate the Battery Cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.

SAVE THESE INSTRUCTIONS.

10

Image 10
Contents Cordless Circular Saw with Dust Collection Personal Safety Electrical SafetyWork Area Service Tool Use and CareSpecific Safety Rules Causes and Operator Prevention of Kickback Dont TRY to Hold Short Places by Hand Page Symbols For Charger Additional Safety Rules For Charger & Battery Cartridge Installing or removing battery cartridge ChargingTips for maintaining maximum battery life Trickle charge MaintenancechargeHex wrench storage Sighting Adjusting depth of cutDust collection Switch action Guide ruleAssembly Removing or installing the saw bladeOuter flange Hex socket head bolt Operation For 5046DA and 5046DB onlyMore than Maintenance Replacing carbon brushesRecycling the Battery Method of disposalBattery cartridge Battery cover Makita Corporation of America
Related manuals
Manual 22 pages 6.18 Kb