Makita 5026DB, 5036DWB, 5026DWB, 5036DA, 5036DWA, 5046D Work Area, Electrical Safety, Personal Safety

Page 2

GENERAL SAFETY RULES

(For All Battery Operated Tools)

WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.

Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create a risk of fire.

Personal Safety

Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be causht in moving parts.

Avoid accidental starting. Be sure switch is in the locked or off position before inserting battery pack. Carrying tools with your finger on the switch or inserting the battery pack into a tool with the switch on invites accidents.

Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

2

Image 2
Contents Cordless Circular Saw with Dust Collection Work Area Electrical SafetyPersonal Safety Service Tool Use and CareSpecific Safety Rules Causes and Operator Prevention of Kickback Dont TRY to Hold Short Places by Hand Page Symbols For Charger Additional Safety Rules For Charger & Battery Cartridge Installing or removing battery cartridge ChargingHex wrench storage Trickle charge MaintenancechargeTips for maintaining maximum battery life Dust collection Adjusting depth of cutSighting Switch action Guide ruleAssembly Removing or installing the saw bladeOuter flange Hex socket head bolt Operation For 5046DA and 5046DB onlyMore than Maintenance Replacing carbon brushesRecycling the Battery Method of disposalBattery cartridge Battery cover Makita Corporation of America
Related manuals
Manual 22 pages 6.18 Kb