Battery Operation, Carton Contents, Diagnostics

BATTERY OPERATION

DIAGNOSTICS

The Model 8924 Charger is equipped with a diagnostic system that automatically checks the battery pack each time a pack is inserted into the charger. If no problems are found, the charger will automatically switch to “Fast Charge” mode as described in "NORMAL CHARGING".

Make sure that the power circuit voltage is the same as that shown on the charger specification plate. Connect the charger to the power source. The red and green lights will flash once to indicate that power is connected properly and the charger is ready for operation.

The charger indicator lights will indicate the following problems:

zIf the green light flashes slowly after battery pack is inserted in charger, the battery pack temperature is either too high or too low for charging. If left alone, the charger will continue to monitor the battery pack temperature and will begin charging when the temperature reaches an acceptable level.

zIf the red light flashes continuously, the battery pack has failed (pack is not chargeable and requires replacement).

As a battery pack approaches the discharged state, you will notice a sharp drop in tool performance. When the tool is unable to perform, recharge the battery pack. Recharging the battery pack before this condition is reached will reduce the total work life of the pack. Discharging the pack beyond this point can damage the pack.

NOTE: Battery temperature will increase during and shortly after use. Batteries may not accept a full charge if they are charged immediately after use. Allow the battery pack to cool to room temperature before charging for best results.

The battery charger may rest on the four pads provided on the bottom of the case or be mounted on a wall by utilizing the two key hole slots provided.

Do not obstruct the vent slots in the top and bottom of charger. Do not charge battery when temperature is BELOW 40°F(4.4°C) or ABOVE 104°F (40°C).

SAVE THESE INSTRUCTIONS!

CARTON CONTENTS

1)Saw

2)Instruction Manual

3)Replacement Parts List

4)Charger

5)Battery Pack

6)Dust Bag

844 specifications

The Porter-Cable 844 is a highly regarded portable benchtop planer, designed to combine power, precision, and convenience for both professional woodworkers and DIY enthusiasts. This planer features a robust 15-amp motor that delivers a substantial 20,000 RPM, ensuring efficient stock removal and smooth finishes on a variety of wood materials.

One of the standout features of the Porter-Cable 844 is its dual blade system, which utilizes two high-quality, reversible blades. This not only increases the tool's durability but also offers an extended lifespan before the need for replacement. The blades can effectively remove up to 1/8 inch of material in a single pass, making it suitable for a wide range of planing tasks, from flattening rough lumber to finishing edges for joint preparation.

The design of the 844 emphasizes user comfort and ease of operation. With a lightweight frame, it is portable enough for easy transport between job sites. Its ergonomic handles provide a comfortable grip, reducing fatigue during extended use. The integrated dust port is another practical feature, allowing for efficient dust collection when attached to a vacuum system. This functionality keeps the workspace tidy and enhances visibility while working.

Porter-Cable’s innovative feed system is designed for consistent and dependable operation. Featuring a variable speed option, the feed rate can be adjusted according to the specifics of the project, which allows users to tailor the planing process to different wood types and thicknesses. The adjustable table height is another beneficial characteristic, allowing for precise depth settings to accommodate various machining requirements.

Safety features are paramount in the design of the Porter-Cable 844. It includes a safety lock-off switch that prevents accidental starts, ensuring a secure operating environment. The combination of power, precision, and user-friendly features makes the Porter-Cable 844 a versatile and essential tool for anyone serious about woodworking.

In summary, the Porter-Cable 844 stands out in its class due to its powerful motor, dual blade capabilities, adjustability, and safety features. Whether you are looking to smooth out rough cuts, prepare wood for joining, or achieve a fine finish on your projects, the Porter-Cable 844 provides the performance and reliability you need to get the job done efficiently. It is a top choice for professional craftsmen and hobbyists alike, ensuring excellent results on each planing task.