Porter-Cable 844 Bevel Positive Stops, To Adjust 90 Positive Stop, To Adjust 45 Positive Stop

Page 16

90° AND 45° BEVEL POSITIVE STOPS

This saw is equipped with adjustable positive stops for both 90° (N) Fig. 12, and 45° bevel cuts (O) Fig. 12. Although these have been set at the factory, check them occasionally to ensure accuracy.

N O

TO ADJUST 90° POSITIVE STOP

Remove the battery pack.

1.Loosen the bevel adjustment locking lever (K) Fig. 11 and position the base for 90° cuts, being sure that the top of the base is in contact with the bottom of stop screw (N) Fig. 12. Tighten the locking lever.

2.Turn the saw upside down, retract the telescoping guard and check the squareness of blade (Fig. 13).

3.If adjustment is necessary, loosen the bevel adjustment locking lever, keeping the top of the base in contact with the stop screw. Turn the stop screw until the angle is correct.

TO ADJUST 45° POSITIVE STOP

Remove the battery

pack.

1.Loosen the bevel adjustment locking lever (K) Fig. 11 and tilt the base until the top of the stop screw (O) Fig. 12 contacts the extension on the bevel segment. Tighten the locking lever.

2.Turn the saw upside down, retract the telescoping guard, and check the 45° angle (Fig. 14).

Fig. 12

Fig. 13

Fig. 14

3.If an adjustment is necessary, loosen the bevel adjustment locking lever and turn the stop screw until the angle is correct.

LINE OF CUT INDICATOR

A line of cut indicator (P) Fig. 15 is provided at the front of the base. The left edge of the notch is used to follow a line when making 90° cuts. The right edge of the notch is used to follow a line when making 45° cuts.

To adjust:

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Cordless Circular Saw Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules General Safety Rules Additional Specific Safety Rules Safety Instructions for All SawsAdditional Specific Safety Rules Lower Guard Safety Instructions Safety Instructions for Charger and Batteries Do not charge battery in damp or wet locations Installing or Removing Battery Pack Charging the Battery PackNormal Charging Carton Contents Battery OperationDiagnostics Assembly Operation Functional DescriptionForeword Starting and Stopping the SAWInstalling the Blade Telescoping GuardTo Adjust Depth of CUT To Adjust for Bevel CutsTo Adjust 90 Positive Stop To Adjust 45 Positive StopLine of CUT Indicator 45 Bevel Positive StopsInstalling Sawdust Exhaust Nozzle To Attach the Base InsertVacuum Cleaner Adapter Installation and Care of Dust BAGTo Attach RIP Guide Crosscutting HOW to USE the SAWRipping Bevel Cutting Pocket Cuts Plunge CuttingTroubleshooting Maintenance Keep Tool CleanFailure to Start LubricationService AccessoriesWarranty Replacement Parts Service and RepairsCanadian PORTER-CABLE Delta Service Centers

844 specifications

The Porter-Cable 844 is a highly regarded portable benchtop planer, designed to combine power, precision, and convenience for both professional woodworkers and DIY enthusiasts. This planer features a robust 15-amp motor that delivers a substantial 20,000 RPM, ensuring efficient stock removal and smooth finishes on a variety of wood materials.

One of the standout features of the Porter-Cable 844 is its dual blade system, which utilizes two high-quality, reversible blades. This not only increases the tool's durability but also offers an extended lifespan before the need for replacement. The blades can effectively remove up to 1/8 inch of material in a single pass, making it suitable for a wide range of planing tasks, from flattening rough lumber to finishing edges for joint preparation.

The design of the 844 emphasizes user comfort and ease of operation. With a lightweight frame, it is portable enough for easy transport between job sites. Its ergonomic handles provide a comfortable grip, reducing fatigue during extended use. The integrated dust port is another practical feature, allowing for efficient dust collection when attached to a vacuum system. This functionality keeps the workspace tidy and enhances visibility while working.

Porter-Cable’s innovative feed system is designed for consistent and dependable operation. Featuring a variable speed option, the feed rate can be adjusted according to the specifics of the project, which allows users to tailor the planing process to different wood types and thicknesses. The adjustable table height is another beneficial characteristic, allowing for precise depth settings to accommodate various machining requirements.

Safety features are paramount in the design of the Porter-Cable 844. It includes a safety lock-off switch that prevents accidental starts, ensuring a secure operating environment. The combination of power, precision, and user-friendly features makes the Porter-Cable 844 a versatile and essential tool for anyone serious about woodworking.

In summary, the Porter-Cable 844 stands out in its class due to its powerful motor, dual blade capabilities, adjustability, and safety features. Whether you are looking to smooth out rough cuts, prepare wood for joining, or achieve a fine finish on your projects, the Porter-Cable 844 provides the performance and reliability you need to get the job done efficiently. It is a top choice for professional craftsmen and hobbyists alike, ensuring excellent results on each planing task.
Top Page Image Contents