Personal Safety, Tool USE and Care | Porter-Cable 735 specs

4.Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, all, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

5.When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.

PERSONAL SAFETY

1.Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

2.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

3.Avoid accidental starting. Be sure the switch is in the OFF before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch ON invites accidents.

4.Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

5.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations.

6.Use safety equipment. Always wear eye protection. Dust mask, non- skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

TOOL USE AND CARE

1.Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

2.Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

3.Do not use tool if switch does not turn it ON or OFF. A tool that cannot be controlled with the switch is dangerous and must be repaired.

4.Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

5.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

6.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control.

7.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

8.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may create a risk of injury when used on another tool.

735 specifications

The Porter-Cable 735 is a versatile and robust thickness planer that has become a go-to tool for both professional woodworkers and DIY enthusiasts alike. Designed to handle a variety of wood types, the 735 excels in providing a smooth and precise finish, making it an essential addition to any workshop.

One of the standout features of the Porter-Cable 735 is its powerful 15-amp motor, which delivers an impressive 20,000 RPM. This high-speed operation enables the planer to tackle even the toughest hardwood, effortlessly removing material while ensuring a consistent finish. With a maximum cutting width of 12 inches and a cutting depth capacity of up to 1/8 inch, users can easily work with larger pieces of lumber, making it suitable for various woodworking projects.

The 735 utilizes a dual-blade design that enhances performance and provides a smooth surface with reduced tear-out. The reversible blades offer extended life, allowing users to switch them when one side becomes dull, reducing downtime and increasing efficiency. Additionally, the tool features a three knife cutter head design that provides a finer finish with minimal effort, ensuring that the results meet the high standards of any woodworking project.

Another significant characteristic of the Porter-Cable 735 is its integrated infeed and outfeed tables. These tables help to support longer workpieces, reducing the risk of snipe, a common issue where the ends of the boards can be cut unevenly. The tables are adjustable, allowing for seamless transitions during operation, which leads to a professional quality finish.

Porter-Cable has also incorporated advanced technology in the 735, including a built-in depth adjustment knob that allows for micro-adjustments, facilitating precise control over the cut depth. This feature adds to the tool's overall ease of use, making it accessible for beginners while still providing the functionality that seasoned woodworkers expect.

The portable design of the 735, combined with its lightweight construction, ensures that it can be easily transported and maneuvered around different job sites. With its durable build quality, the Porter-Cable 735 is designed to withstand the rigors of daily use, ensuring longevity and reliability.

In summary, the Porter-Cable 735 thickness planer combines power, precision, and innovative features, making it an invaluable tool for anyone serious about woodworking. Its performance, coupled with user-friendly design elements, guarantees that both novices and experienced woodworkers can achieve outstanding results in their projects.