Positive 0 Bevel Stop, To Check, To Adjust | Ryobi R10630 specification

OPERATION

POSITIVE 0° BEVEL STOP

See Figure 21.

Your saw has a positive 0° bevel stop, that has been factory adjusted to assure 0° angle of your saw blade when making 90° cuts. However, misalignment can occur during shipping.

TO CHECK

■Remove battery pack from saw.

WARNING:

CARPENTER'S

SQUARE

BLADE

Failure to remove battery pack from saw could result in accidental starting causing possible serious personal injury.

■Place your saw in an upside down position on workbench. See Figure 21.

■Using a carpenter's square, check squareness of saw blade to the base of your saw.

TO ADJUST

■Remove battery pack from saw.

WARNING:

Failure to remove battery pack from saw could result in accidental starting causing possible serious personal injury.

■Loosen bevel adjustment knob.

■Loosen hex nut securing adjustment screw.

■Turn screw and adjust base until square with saw blade.

■Tighten hex nut and bevel adjustment knob securely.

WARNING:

Attempting to make cuts without bevel adjustment knob securely tightened can result in serious injury.

TO POCKET CUT

See Figure 22.

WARNING:

Always adjust bevel setting to zero before making a pocket cut. Attempting a pocket cut at any other setting can result in loss of control of your saw possibly causing serious injury.

Adjust the bevel setting to zero, set blade to correct blade depth setting, and swing the lower blade guard up using the lower blade guard handle.

Always raise the lower blade guard with the handle to avoid serious injury.

While holding lower blade guard by the handle, firmly rest the

ADJUSTMENT

SCREW

	50
	45
30
22	0	BEVEL
15	0	BEVEL
	1	ADJUSTMENT
0	45
0
	2	KNOB
HEX NUT		POSITIVE 0°
		BEVEL STOP	Fig. 21
			Fig. 21

LOWER BLADE

GUARD HANDLE

LOWER

BLADE GUARD

450 5

3 0 2 2

POCKET CUT	Fig. 22

front of the base flat against the workpiece with the rear of the handle raised so the blade does not touch the workpiece. See Figure 22.

Depress the lock-off button and squeeze the switch trigger to start your saw. Always let the blade reach full speed then slowly lower blade into the workpiece until base is flat against workpiece.

After you complete your cut release the trigger and allow the blade to come to a complete stop. After the blade has stopped, remove it from the workpiece. Corners may then be cleared out with a hand saw or sabre saw.

WARNING:

Never tie the lower blade guard in a raised position. Leaving the blade exposed could lead to serious injury.

Page 17

R10630 specifications

The Ryobi R10630 is a standout model in the realm of power tools, particularly appealing to DIY enthusiasts and professionals alike. This versatile tool combines innovative technology with practical features, making it a valuable addition to any toolbox.

One of the main highlights of the Ryobi R10630 is its powerful motor. Equipped with a robust 10 amp motor, this tool delivers impressive performance for various applications, including cutting, sanding, and drilling tasks. The motor ensures that users can tackle tougher materials with ease, making it suitable for a wide range of projects.

Another significant feature of the R10630 is its lightweight design. Weighing in at just under eight pounds, this tool is easy to handle, reducing user fatigue during longer projects. The ergonomic design also enhances comfort, allowing for extended use without discomfort.

The Ryobi R10630 incorporates advanced technologies that elevate its functionality. The tool is equipped with an electronic speed control system, allowing users to adjust the speed settings easily, depending on the materials they are working with. This feature ensures that users achieve optimal results, whether they are working with softwoods, hardwoods, or metal.

Safety is also a priority in the design of the R10630. It includes a safety lock-off switch, preventing accidental operation, which is crucial for ensuring user protection during use. Additionally, the onboard LED work light illuminates the work area, providing better visibility and enhancing precision, especially in dimly lit spaces.

Durability is another significant characteristic of the Ryobi R10630. Crafted from high-quality materials, it is designed to withstand rigorous use over time. Its sturdy construction ensures longevity, making it a reliable tool that users can depend on for years to come.

The Ryobi R10630's versatility sets it apart from its competitors. With multiple attachments available, users can easily switch between tasks, ranging from sanding surfaces to making precise cuts. This adaptability makes it a favorite among both hobbyists and professionals who require a tool that can meet various demands.

Overall, the Ryobi R10630 brilliantly combines power, comfort, and adaptability. With its advanced features and robust construction, it stands out as a top choice for anyone looking to enhance their woodworking and DIY capabilities. Whether you are a seasoned professional or just starting, the R10630 proves to be an invaluable asset in achieving high-quality results.