Ryobi R10630 Kickback is Caused by, To Lessen the Chance of Kickback, Blade SET TOO Deep

Page 12

OPERATION

KICKBACK

See Figure 8.

The best guard against kickback is to avoid dangerous practices.

Kickback occurs when the blade stalls rapidly and the saw is driven back towards you. Blade stalling is caused by any action which pinches the blade in the wood.

DANGER:

 

KICKBACK

BLADE SET TOO DEEP

Fig. 8

 

 

Release switch immediately if blade binds or saw stalls. Kickback could cause you to lose control of your saw. Loss of control can lead to serious injury.

KICKBACK IS CAUSED BY:

■Incorrect blade depth setting. See Figure 8.

■Sawing into knots or nails in workpiece.

■Twisting blade while making a cut.

■Making a cut with a dull, gummed up, or improperly set blade.

■Incorrectly supporting workpiece. See Figure 9.

■Forcing a cut.

■Cutting warped or wet lumber.

■Tool misuse or incorrect operating procedures.

TO LESSEN THE CHANCE OF KICKBACK:

■Always keep the correct blade depth setting – the correct blade depth setting for all cuts should not exceed 1/4 in. below the material to be cut. See Figure 10. One blade tooth below the material to be cut works best for most efficient cutting action.

■Inspect the workpiece for knots or nails before beginning a cut. Never saw into a knot or nail.

■Make straight cuts. Always use a straight edge guide when rip cutting. This helps prevent twisting the blade in the cut.

■Always use clean, sharp and properly set blades. Never make cuts with dull blades.

■To avoid pinching the blade, support the workpiece properly before beginning a cut. The right and wrong ways to support large pieces of work are shown in figures 9 and 11.

50

45

30 22.5

15

0

WRONG

Fig. 9

CORRECT BLADE DEPTH SETTING =

 

BLADE EXPOSED ONE BLADE TOOTH

Fig. 10

BELOW THE MATERIAL TO BE CUT

5

4

0

5

30 22.5

15

0

RIGHT

Fig. 11

Page 12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operators Manual Thank YOU for Buying a Ryobi Cordless Circular SAWTable of Contents AccessoriesUnpacking Symbol Meaning Safety Alert Symbol Rules for Safe OperationRead ALL Instructions Important Safety Instructions for Charger Important Safety Rules for Battery ToolsDo not Charge Battery Tool in a Damp or WET Location When Servicing USE only Identical Replacement PartsImportant Safety Instructions for Circular Saws Lower Blade GuardFeatures SwitchKnow Your Cordless Circular SAW ApplicationsCharger Part Number ChargerRED Light on Operation To ChargeOperation To Install Battery Pack To Assemble or Remove BladeSAW Blades Blade Guard SystemTo Remove Blade Kickback Kickback is Caused byTo Lessen the Chance of Kickback KickbackDepth of CUT Adjustment To Adjust Blade DepthStarting a CUT To Help Maintain Control RIP Cuts Base Assembly To Cross CUT or RIP CUTWidth of CUT Scale TOP View of SAW Guideline Front of SAW Blade Guide NotchTo Adjust Bevel Setting Blade Guide Notch GuidelineGuard To Adjust Positive 0 Bevel StopTo Check To Pocket CUTTo RIP CUT To Assemble Optional RIP GuideMaintenance Battery Pack Removal and Preparation for RecyclingBatteries Ryobi Cordless Circular SAW Model Number R10630 Parts List 2 in. Cordless Circular SAW Model NO. R10630

R10630 specifications

The Ryobi R10630 is a standout model in the realm of power tools, particularly appealing to DIY enthusiasts and professionals alike. This versatile tool combines innovative technology with practical features, making it a valuable addition to any toolbox.

One of the main highlights of the Ryobi R10630 is its powerful motor. Equipped with a robust 10 amp motor, this tool delivers impressive performance for various applications, including cutting, sanding, and drilling tasks. The motor ensures that users can tackle tougher materials with ease, making it suitable for a wide range of projects.

Another significant feature of the R10630 is its lightweight design. Weighing in at just under eight pounds, this tool is easy to handle, reducing user fatigue during longer projects. The ergonomic design also enhances comfort, allowing for extended use without discomfort.

The Ryobi R10630 incorporates advanced technologies that elevate its functionality. The tool is equipped with an electronic speed control system, allowing users to adjust the speed settings easily, depending on the materials they are working with. This feature ensures that users achieve optimal results, whether they are working with softwoods, hardwoods, or metal.

Safety is also a priority in the design of the R10630. It includes a safety lock-off switch, preventing accidental operation, which is crucial for ensuring user protection during use. Additionally, the onboard LED work light illuminates the work area, providing better visibility and enhancing precision, especially in dimly lit spaces.

Durability is another significant characteristic of the Ryobi R10630. Crafted from high-quality materials, it is designed to withstand rigorous use over time. Its sturdy construction ensures longevity, making it a reliable tool that users can depend on for years to come.

The Ryobi R10630's versatility sets it apart from its competitors. With multiple attachments available, users can easily switch between tasks, ranging from sanding surfaces to making precise cuts. This adaptability makes it a favorite among both hobbyists and professionals who require a tool that can meet various demands.

Overall, the Ryobi R10630 brilliantly combines power, comfort, and adaptability. With its advanced features and robust construction, it stands out as a top choice for anyone looking to enhance their woodworking and DIY capabilities. Whether you are a seasoned professional or just starting, the R10630 proves to be an invaluable asset in achieving high-quality results.
Top Page Image Contents