Chicago Electric 68104 Cleaning, Maintenance, and Lubrication, Cut-off Wheel Storage and Handling

Page 8

Maintenance and Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY

FROM ACCIDENTAL OPERATION:

Release the Trigger and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

Cleaning, Maintenance, and Lubrication

1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.

2.AFTER USE, wipe external surfaces of the tool with clean cloth.

3.WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.

Cut-off Wheel Storage and Handling

1.Handle Cut-off Wheels carefully to prevent dropping or bumping. Do not use wheels that have been dropped or bumped.

2.Store Cut-off Wheels in shelves, racks, boxes, or drawers. Storage area must be kept dry, and above freezing. Any grinding or cut-off wheels exposed to humidity or freezing temperatures must not be used.

Page 8

For technical questions, please call 1-800-444-3353.

SKU 68104

Image 8
Contents Save this Manual Email our technical support at tech@harborfreight.comGeneral Tool Safety Warnings SpecificationsTable a Recommended Minimum Wire Save This Manual110-120 V~ Grounded Tools Tools with Three Prong Plugs Grounding InstructionsGrounding Pin For up to 125 V~ and up to 15 aGrinder Safety Warnings Vibration SafetyInstructions for Putting into Use BallLock Ball Depth Bolt Nut Angle Vise Quick Guide Release CrankTool Set Up Operating InstructionsTo Prevent Serious Injury From Accidental Operation To Prevent Serious InjuryArbor Bolt Washer Outer Flange Cut-off Wheel Inner Flange Work Piece and Work Area Set UpGeneral Operating Instructions Cleaning, Maintenance, and Lubrication Maintenance and ServicingCut-off Wheel Storage and Handling To Prevent Serious Injury from Tool FailureTroubleshooting Problem Possible Causes Likely SolutionsParts List Part DescriptionAssembly Diagram Limited 90 Day Warranty Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800