SPECIFICATIONS
Motor | 120 V~ / 60 Hz / 10 A; 5,000 RPM |
Laser Battery Type | “AAA” (Qty. 2 included) |
Saw Blade | |
| Minimum 5,000 RPM Rating |
Maximum Cutting Depth | |
Spindle Diameter | 5/8” |
Base Plate Dimensions | |
Fence Guide Dimensions |
|
CAUTION
LASER LIGHT
DO NOT STARE
INTO BEAM
Max. Output: <1 mW,
Wavelength: 650 nm
CLASS II LASER PRODUCT
This product complies with 21 CFR 1040.10 and 1040.11
3491 Mission Oaks Blvd.,
Camarillo, CA, USA, 93011
Manufacture Date:
, ___________
UNPACKING
When unpacking, make sure the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
To prevent serious injury from flying Fragments: Do not use blades made from
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Functions
LASER | Trigger (67) | SAFTEY | |
|
| BUTTON | |
SWITCH (74) |
|
|
|
LASER |
|
|
|
|
|
| |
GUIDE |
|
|
|
Instructions for putting
into use
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Turn the Trigger of the tool off and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
1.Safety Button: The Circular Saw is equipped with a Safety Button. To turn the Saw on, first depress the Safety
Button and then pull on the Trigger.
2.Laser Switch (74): The Circular Saw is equipped with a Laser Guide that is designed to aid alignment of the Saw Blade with the cutting line on the workpiece. To operate, push the Laser
Switch to its “ON” or “OFF” positions.
REV 10g
SKU 95004 | For technical questions, please call | Page 10 |