Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
To prevent serious injury
from accidental operation:
Turn the Trigger of the tool off and unplug the tool from its electrical outlet before adjusting tool or installing accessories.
To Install A Saw Blade:
CAUTION! To avoid accidental cuts to hands and fingers, always wear heavy duty work gloves when installing Saw Blades (20).
SPINDLE
LOCK (39)
1.Depress the Spindle Lock (39) to hold the Spindle stationary.
OUTER PLATE
(18)
SCREW
(48)
HEX
WRENCH
(69)
SAW BLADE
(20)
2.Use the accessory Hex Wrench (69) to unscrew and remove the Screw (48).
3.Remove the Outer Plate (18).
BLADE
HOUSING (11)
SAFETY
COVER (26)
4.Raise up on the Safety Cover (26). Then, install the Saw Blade (20) on the Spindle of the tool.
IMPORTANT: When installing a Saw Blade (20), make sure the teeth of the Saw Blade point upward and that the direction of the arrow shown on the Saw Blade matches the direction of the arrow shown on the Blade Housing (11).
5.Release the Safety Cover (18), and allow it to return to its original position.
6.
SKU 95004 | For technical questions, please call | Page 11 |