Festool PN561438, PD561438 Turning On the Saw, Using the Outrigger Splinter Guard

Page 14

Turning On the Saw

To prevent unexpected start-ups, the power switch has an integral safety interlock. Before the saw can be started, the plunge release must be engaged.

1.Insert the Plug-it cord into the saw with the keyway lined up with the key, and twist the end to lock it in place.

2.Press up on the plunge release lever.

3.Pull back on the power trigger.

Using the Outrigger Splinter Guard

The outrigger splinter guard is used when the cut to the right of the blade needs to be chip-free. When not in use, the outrigger can be raised out of the way. For bevel cuts, the outrigger is easily removable.

1.Remove the thumbscrew from the outrigger and slide the outrigger on to the front edge of the blade cover as shown.

2.Insert the thumbscrew through the outrigger, through the height adjustment slot, and into the captive nut on the back side of the outrigger.

3.Place the saw on the guide rail, on the workpiece, and lower the splinter guard down to the surface of the workpiece.

4.Tighten the thumbscrew.

Notes

►Inspect the bottom of the outrigger for burrs that could scratch the workpiece.

►Remove the outrigger when making bevel cuts.

►For plunge cuts, there is an index mark to indicate the blade position when the blade is at full depth.

14

TS 55 EQ Circular Saw

Page 13 Page 15
Image 14
Page 13 Page 15
Contents TS 55 EQ Festool Limited Warranty WarrantyConditions of 1+2 Warranty Liability StatementContents General Safety Rules Causes and Prevention of Kickback Specific Safety Rules for Circular SawsService Respiratory Exposure WarningTechnical Specifications Tool DescriptionIntended Use Setup and AdjustmentsSetting up a New Saw Single-Point EntryAdjusting the Guide Rail Gib Cams Trimming the Guide Rail Splinter GuardReplacing and Adjusting the Riving Knife Trimming the Outrigger Splinter GuardRemoving the Sawblade Changing the SawbladeSawblade Checks and Warnings Replacing the SawbladeSetting the Blade Perpendicular to the Sole Plate Adjustment ProcedureAdjusting the 45º Bevel Stop Matching the TS 55 to an Existing Guide RailOperation Setting the Blade DepthSetting the Motor Speed Using the Outrigger Splinter Guard Turning On the SawSetting the Bevel Angle Using the Guide StopUsing Dust Extraction Tips for Successful Straight-Lining ApplicationsStraight-Lining Rough Lumber Crosscutting and Trimming Tips for Successful CrosscuttingGeneral Procedure Plunge CuttingBrittle Plastics Cutting Non-Wood MaterialsSoft Plastics Thin AluminumAccessories SawbladesDust Cover Guide Rail Accessory KitGuide Rails Rip Fence Parallel GuideStacking Systainers Systainer System ContainerParts of the Systainer Troubleshooting Symptom Possible CausesKeep the Saw Clean MaintenanceRoutine Maintenance Adjust and Inspect the SawReplacing the Guide Rail Gib Cams Replacing the Guide Rail Splinter GuardProcedure Changing the Motor Brushes

PD561438, PN561438 specifications

The Festool PN561438 and PD561438 are integral components designed to enhance the functionality and overall experience of Festool's robust tool lineup. Specifically crafted for professionals and hobbyists alike, these tools exemplify precision engineering and superior build quality, characteristic of the Festool brand.

The PN561438 is a versatile tool that focuses on delivering optimal performance in various applications. One of its standout features is the ability to seamlessly integrate with other Festool products, embodying their commitment to a complete system approach. This tool is particularly noted for its lightweight and ergonomic design, which enables users to operate it comfortably over extended periods. Enhanced grip zones and a balanced weight distribution contribute significantly to reducing user fatigue, making it an excellent choice for detailed and prolonged tasks.

The PD561438, meanwhile, serves as a specialized accessory that complements the PN561438. This product is constructed from high-quality materials that ensure durability and long service life, even under challenging working conditions. Its design incorporates advanced dust extraction capabilities, which not only maintain a clean workspace but also improve visibility, thereby increasing overall efficiency. The innovative filtration system reduces harmful dust particles, promoting a safer work environment.

Both the PN561438 and PD561438 prioritize user-friendliness with intuitive controls and straightforward setup, making them accessible to both novices and seasoned tradespeople. Additionally, these tools boast robust safety features that prevent accidental starts and ensure secure operation, addressing the critical aspect of user safety.

The technologies integrated into these models reflect Festool's deep commitment to advancing tool performance. The incorporation of brushless motor technology provides increased power efficiency and longevity. Furthermore, the tools feature intelligent electronics that monitor performance in real-time, adjusting power and speed based on the application at hand.

Overall, the Festool PN561438 and PD561438 stand out in a crowded market due to their exceptional engineering, user-friendly design, and commitment to professional-grade performance. Ideal for a wide range of applications, these tools embody Festool’s philosophy of innovation, quality, and efficiency, making them a valuable addition to any toolkit. Whether for woodworking, construction, or detailed crafting, these tools help elevate project outcomes to new heights.
Top Page Image Contents