Festool PD561438 Trimming the Outrigger Splinter Guard, Replacing and Adjusting the Riving Knife

Page 9

Trimming the Outrigger Splinter Guard

The outrigger splinter guard is used to prevent chipping on the offcut side of the sawblade. The outrigger can be retracted away from the workpiece when not needed.

Before the outrigger splinter guard is used for the first time, it needs to be trimmed to fit the sawblade.

1.Remove the thumbscrew from the outrigger and slide the outrigger on to the front edge of the blade guard as shown.

2.Insert the thumbscrew through the outrigger, through the height adjustment slot, and into the captive nut on the back side of the outrigger.

3.Raise the outrigger to its top position and tighten the thumbscrew.

4.Place the saw on a stable surface so that the blade can be plunged down without cutting the surface (or use a piece of scrap wood).

5.Set the motor speed to its lowest setting (setting 1).

6.Start the saw and slowly plunge the blade to full depth.

Replacing and Adjusting the Riving Knife

Periodically inspect the riving knife to ensure it is not bent and has proper clearance away from the blade. Replace if bent.

1.Unplug the saw for safety.

2.Raise the FastFix latch lever and plunge the saw until it locks into position (see page 10 for more information on the FastFix lever).

3.Using the arbor wrench (stored in the auxiliary handle) loosen the riving knife mounting screw.

4.If the riving knife needs replacement, slide it out of its mounting, and slide a new knife back in.

5.Raise or lower the riving knife so there is a 2 to 4 mm (3/32 to 5/32 inch) clearance between the knife and the blade.

6.Retighten the mounting screw.

Instruction Manual

9

Image 9
Contents TS 55 EQ Conditions of 1+2 Warranty WarrantyFestool Limited Warranty Liability StatementContents General Safety Rules Service Specific Safety Rules for Circular SawsCauses and Prevention of Kickback Respiratory Exposure WarningTool Description Technical SpecificationsSetting up a New Saw Setup and AdjustmentsIntended Use Single-Point EntryTrimming the Guide Rail Splinter Guard Adjusting the Guide Rail Gib CamsTrimming the Outrigger Splinter Guard Replacing and Adjusting the Riving KnifeSawblade Checks and Warnings Changing the SawbladeRemoving the Sawblade Replacing the SawbladeAdjustment Procedure Setting the Blade Perpendicular to the Sole PlateMatching the TS 55 to an Existing Guide Rail Adjusting the 45º Bevel StopSetting the Blade Depth Setting the Motor SpeedOperation Turning On the Saw Using the Outrigger Splinter GuardUsing the Guide Stop Setting the Bevel AngleUsing Dust Extraction Applications Straight-Lining Rough LumberTips for Successful Straight-Lining Tips for Successful Crosscutting Crosscutting and TrimmingPlunge Cutting General ProcedureSoft Plastics Cutting Non-Wood MaterialsBrittle Plastics Thin AluminumSawblades AccessoriesGuide Rails Guide Rail Accessory KitDust Cover Rip Fence Parallel GuideSystainer System Container Parts of the SystainerStacking Systainers Symptom Possible Causes TroubleshootingRoutine Maintenance MaintenanceKeep the Saw Clean Adjust and Inspect the SawReplacing the Guide Rail Splinter Guard Replacing the Guide Rail Gib CamsChanging the Motor Brushes Procedure

PD561438, PN561438 specifications

The Festool PN561438 and PD561438 are integral components designed to enhance the functionality and overall experience of Festool's robust tool lineup. Specifically crafted for professionals and hobbyists alike, these tools exemplify precision engineering and superior build quality, characteristic of the Festool brand.

The PN561438 is a versatile tool that focuses on delivering optimal performance in various applications. One of its standout features is the ability to seamlessly integrate with other Festool products, embodying their commitment to a complete system approach. This tool is particularly noted for its lightweight and ergonomic design, which enables users to operate it comfortably over extended periods. Enhanced grip zones and a balanced weight distribution contribute significantly to reducing user fatigue, making it an excellent choice for detailed and prolonged tasks.

The PD561438, meanwhile, serves as a specialized accessory that complements the PN561438. This product is constructed from high-quality materials that ensure durability and long service life, even under challenging working conditions. Its design incorporates advanced dust extraction capabilities, which not only maintain a clean workspace but also improve visibility, thereby increasing overall efficiency. The innovative filtration system reduces harmful dust particles, promoting a safer work environment.

Both the PN561438 and PD561438 prioritize user-friendliness with intuitive controls and straightforward setup, making them accessible to both novices and seasoned tradespeople. Additionally, these tools boast robust safety features that prevent accidental starts and ensure secure operation, addressing the critical aspect of user safety.

The technologies integrated into these models reflect Festool's deep commitment to advancing tool performance. The incorporation of brushless motor technology provides increased power efficiency and longevity. Furthermore, the tools feature intelligent electronics that monitor performance in real-time, adjusting power and speed based on the application at hand.

Overall, the Festool PN561438 and PD561438 stand out in a crowded market due to their exceptional engineering, user-friendly design, and commitment to professional-grade performance. Ideal for a wide range of applications, these tools embody Festool’s philosophy of innovation, quality, and efficiency, making them a valuable addition to any toolkit. Whether for woodworking, construction, or detailed crafting, these tools help elevate project outcomes to new heights.