Festool PD561438 Setup and Adjustments, Intended Use, Single-Point Entry, Setting up a New Saw

Page 7

Intended Use

The TS 55 EQ, hand-operated circular saw, is designed exclusively for sawing of wood, wood-like materials, and plastics. The saw may also be used for cutting aluminum when a Festool aluminum-cutting sawblade is installed. The tool should not be altered or used for any other purpose, other than as specified in these operating instructions. Using the tool in contravention to this manual will void your warrantee and may lead to injury. The user shall be responsible and liable for damages and accidents resulting from misuse or abuse of this saw.

Single-Point Entry

Single point entry means that the sawblade always enters the cut at the same location regardless what the bevel angle is set to. The pivot point of the bevel adjustment is located at the bottom edge of the splinter guard. This means that the cut will always be along the splinter guard for any bevel setting.

(Note that this is applicable only when the guide rail is used. When the guide rail is not under the saw, the bevel cut will move slightly outward, away from the main body of the saw.)

Setup and Adjustments

Setting up a New Saw

There are some simple setup procedures to follow before a new saw can be used. Follow this sequence of inspections and adjustments before using the saw for the first time. It is important that these instructions be followed sequentially before cutting the zero-clearance splinter guards.

!WARNING: Always disconnect the saw from the power supply before making any adjustments to the saw or installing or removing any accessory!

1.With the saw unplugged, inspect the blade for damage and make sure it is properly secured to the arbor. (Refer to "Changing the Sawblade" on page 10 for more information).

!WARNING: Check regularly whether the saw blade is in good condition. Saw blades which are cracked, damaged, or deformed should no longer be used.

2.The riving knife is installed and adjusted at the factory, however, you should verify that it is properly secured and adjusted (refer to page 9 for more information).

!CAUTION: The riving knife is a safety feature of the saw to prevent binding in the cut. All saw work should be carried out only with the riving knife installed and correctly set!

3.Install the power cord into the [Plug It] receptacle on the saw (refer to page 14 for more information).

4.Perform the guide rail gib cam adjustment procedure described on page 8.

5.After completing all of the inspections and adjustments listed above, cut the zero-clearance splinter guards as described on page 8.

Instruction Manual

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents TS 55 EQ Liability Statement WarrantyConditions of 1+2 Warranty Festool Limited WarrantyContents General Safety Rules Respiratory Exposure Warning Specific Safety Rules for Circular SawsService Causes and Prevention of KickbackTool Description Technical SpecificationsSingle-Point Entry Setup and AdjustmentsSetting up a New Saw Intended UseTrimming the Guide Rail Splinter Guard Adjusting the Guide Rail Gib CamsTrimming the Outrigger Splinter Guard Replacing and Adjusting the Riving KnifeReplacing the Sawblade Changing the SawbladeSawblade Checks and Warnings Removing the SawbladeAdjustment Procedure Setting the Blade Perpendicular to the Sole PlateMatching the TS 55 to an Existing Guide Rail Adjusting the 45º Bevel StopSetting the Motor Speed Setting the Blade DepthOperation Turning On the Saw Using the Outrigger Splinter GuardUsing the Guide Stop Setting the Bevel AngleUsing Dust Extraction Straight-Lining Rough Lumber ApplicationsTips for Successful Straight-Lining Tips for Successful Crosscutting Crosscutting and TrimmingPlunge Cutting General ProcedureThin Aluminum Cutting Non-Wood MaterialsSoft Plastics Brittle PlasticsSawblades AccessoriesRip Fence Parallel Guide Guide Rail Accessory KitGuide Rails Dust CoverParts of the Systainer Systainer System ContainerStacking Systainers Symptom Possible Causes TroubleshootingAdjust and Inspect the Saw MaintenanceRoutine Maintenance Keep the Saw CleanReplacing the Guide Rail Splinter Guard Replacing the Guide Rail Gib CamsChanging the Motor Brushes Procedure

PD561438, PN561438 specifications

The Festool PN561438 and PD561438 are integral components designed to enhance the functionality and overall experience of Festool's robust tool lineup. Specifically crafted for professionals and hobbyists alike, these tools exemplify precision engineering and superior build quality, characteristic of the Festool brand.

The PN561438 is a versatile tool that focuses on delivering optimal performance in various applications. One of its standout features is the ability to seamlessly integrate with other Festool products, embodying their commitment to a complete system approach. This tool is particularly noted for its lightweight and ergonomic design, which enables users to operate it comfortably over extended periods. Enhanced grip zones and a balanced weight distribution contribute significantly to reducing user fatigue, making it an excellent choice for detailed and prolonged tasks.

The PD561438, meanwhile, serves as a specialized accessory that complements the PN561438. This product is constructed from high-quality materials that ensure durability and long service life, even under challenging working conditions. Its design incorporates advanced dust extraction capabilities, which not only maintain a clean workspace but also improve visibility, thereby increasing overall efficiency. The innovative filtration system reduces harmful dust particles, promoting a safer work environment.

Both the PN561438 and PD561438 prioritize user-friendliness with intuitive controls and straightforward setup, making them accessible to both novices and seasoned tradespeople. Additionally, these tools boast robust safety features that prevent accidental starts and ensure secure operation, addressing the critical aspect of user safety.

The technologies integrated into these models reflect Festool's deep commitment to advancing tool performance. The incorporation of brushless motor technology provides increased power efficiency and longevity. Furthermore, the tools feature intelligent electronics that monitor performance in real-time, adjusting power and speed based on the application at hand.

Overall, the Festool PN561438 and PD561438 stand out in a crowded market due to their exceptional engineering, user-friendly design, and commitment to professional-grade performance. Ideal for a wide range of applications, these tools embody Festool’s philosophy of innovation, quality, and efficiency, making them a valuable addition to any toolkit. Whether for woodworking, construction, or detailed crafting, these tools help elevate project outcomes to new heights.
Top Page Image Contents