JVC LT-42X688, LT-37X688 manual Connecting to a Digital TV Receiver, Quick Setup

Quick Setup

Connecting to a Digital TV Receiver

By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in their digital form.

	INPUT 3
S-VIDEO
Y	COMPONENT	VIDEO	AUDIO
PB		L
PR		R

INPUT 4

Y	COMPONENT	VIDEO	AUDIO
PB		L
PR		R

INPUT 5

/INPUT 1 AUDIO

VIDEO

L

R AUDIO

AUDIO

OUT

L

R AUDIO

TV Rear Panel

After the connections have been made, tighten the screw to secure the cables.

HDMI to DVI Cable

L	R
AUDIO OUT		DIGITAL OUT

DTV Decoder

			SERVICE
75 Ω	PHOTO	INPUT 1	INPUT 2 DIGITAL AUDIO
(VHF/UHF)	VIEWER		OPTICAL OUT

TV Rear Panel

1)Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder to the HDMI INPUT-1 on the back of your television.

2)Connect a red cable from the DTV decoder RIGHT AUDIO OUT to the RIGHT AUDIO INPUT HDMI AUDIO IN "R" on the back of your television.

3)Connect a white cable from the DTV decoder LEFT AUDIO OUT to the LEFT AUDIO INPUT HDMI AUDIO IN "L" on the back of your television.

•Personal computer compatibility cannot be guaranteed.

•Use an HDMI to DVI cable (commercially available) in order to digitally connect the television with a DTV decoder.

Notes:

•If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance may be slightly shifted. Access the “HDMI Size” in the External Input menu to adjust it. (Refer to page 44.)

•When you do the above connection, set "Video-1 Audio" in the External Input menu to "Analog". See "Video-1 Audio", page 44.

•The Analog Audio input can only be used with the HDMI INPUT-1.

•When setting the “Video-1 Audio - Analog/Digital” menu setting on the TV, please note that this setting only effects the HDMI INPUT-1 jack and that if you use a DVI to HDMI adapter this connection must be made to the HDMI INPUT-1 along with analog audio cables.

18