Specifications | Powermatic PM2800B instruction

5.0Specifications

Model number	PM2800B
Stock number	1792800B
Motor and electricals:
Motor type	totally enclosed fan cooled, induction, capacitor start
Horsepower	1 HP
Phase	single
Voltage	115/230V (prewired 115V)
Cycle	60Hz
Listed FLA (full load amps)	15/7.5 A
Starting amps	62/31 A
Running amps (no load)	12.3 A
Start capacitor	300μF, 250VAC
Power transfer	belt
On/off switch	push/pull, with safety key and power indicator lamp
Motor speed	1725 RPM
Power cord	14 AWG, 6-1/2 ft. (198cm)
Power plug installed	yes
Recommended circuit size1	20A for 115V; 15A for 230V
Sound emission	90 dB at 40”(1m) without load
Laser	Class II

Head and Capacities:
Swing	18” (460mm)
Chuck style and shank capacity	keyless, 5/8” (16mm)
Chuck arbor taper	JT-3
Spindle taper	JT-3/MT-2
Spindle travel	6” (152mm)
Quill diameter	2.6” (66mm)
Maximum speed range	250 to 3000 RPM
Maximum spindle to table distance	26-5/8” (676mm)
Maximum chuck to table distance	22-3/8” (568mm)
Maximum spindle to base distance	44-3/4” (1136mm)
Maximum chuck to base distance	40-1/2” (1029mm)
Materials:
Head	cast iron
Table	cast iron
Column	steel
Base	cast iron
Fence	aluminum
Table:
Table size	20-1/2” L x 14” W (521 x 355mm)
Table miter slots (2)	11/32”W x 3/4“H (8.7 x 19mm)
Table T-slots (2)	7/32” W x 3/8” H (5.6 x 9.5mm)
Distance between table slots (centers)	7-5/8” (194mm)
Table tilt	0 to 90 deg. L and R
Table insert	3-3/4” x 3-3/4” (95 x 95mm)
Fence size	20” L x 2-3/4” H (508 x 70mm)
Base and Column:
Base size	13-1/2” L x 20-1/2” W (343 x 521mm)
Base working surface	10” L x 12” W (254 x 305mm)
Base slots (2)	5/8” W x 4-5/8” L (16 x 118mm)
Distance between base slots (centers)	5-1/8” (130mm)
Column diameter	3-1/8” (80mm)
Dimensions and Weights:
Overall dimensions, assembled	18” L x 20-1/4” W x 71” H (457 x 514 x 1803mm)
Net weight	246 lb (112kg)
Shipping weight	266 lb (120kg)