.FUNCTIONAL DESCRIPTION
Clutch handle | Speed selector switch |
| |
Keyless |
|
| |
drill chuck | Vent |
| |
|
| ||
| holes |
| |
| Forward/ |
| |
| Reverse |
| |
| lever |
| |
Variable speed | Battery pack |
| |
control trigger | release button |
| |
18V Battery pack |
|
| |
(EY9251) |
| Support handle | |
Battery charger (EY0110) | |||
| |||
. ASSEMBLY
Attaching or removing bit
Note: When attaching or removing a bit, disconnect battery pack from tool or place the switch in the center position (switch lock).
This tool is equipped with a keyless drill chuck.
1.Attachment
Insert the bit and turn the Lock collar clockwise (looking from the front) to tighten firmly until it stops clicking.
Lock collar
Lock collar
Note: If excessive play occurs in the chuck, secure the drill in place and tighten the chuck by turning clockwise, open the chuck jaws by unscrewing the Lock collar and
tighten the screw
2.Removal
Slide the Lock collar to FREE side. Turn the Lock collar counterclockwise (looking from the front), then remove the bit.
- 6 -