Panasonic EY6950 operating instructions For, Instructions

Page 4

8) During charging, the charger may

.FOR

become slightly warm. This is nor-

mal. Do not charge the battery for a

BATTERY CHARGER

long period.

& BATTERY PACK

Symbol

meaning

IMPORTANT SAFETY

V

Volts

 

Direct Current

INSTRUCTIONS

 

1) SAVETHESE INSTRUC-

n0

no load speed

TIONS-This manual contains important

 

revolutions or

…/min

important safety and operating instruc-

reciprocation per minutes

tions for battery charger EY0110.

 

 

Forward Rotation

2) Before using battery charger, read all

 

instructions and cautionary markings

 

 

 

Reverse Rotation

on (1) battery charger, (2) battery pack.

 

3) CAUTION -To reduce the risk

 

Rotation with Hammering

 

of injury, charge only Battery Pack

 

 

shown below.

 

Rotation only

EY9065, EY9066, EY9168, EY9080,

 

 

EY9086, EY9180, EY9182, EY9001,

 

 

EY9006, EY9101, EY9106, EY9200,

WARNING;

EY9201, EY9136, EY9230, EY9231

EY9251, EY9117, EY9210, EY9231

Some dust created by power sand-

Other types of batteries may burst

causing personal injury and damage.

ing, sawing, grinding, drilling, and

4) Do not expose charger to rain or snow.

other construction activities con-

tains chemicals known to the State

5) To reduce risk of damaging the electric

of California to cause cancer, birth

plug and cord, pull by plug rather than

defects or other reproductive harm.

cord when disconnecting charger.

Some examples of these chemicals

6) Make sure cord is located so that it

are:

 

 

will not be stepped on, tripped over,

* Lead from lead-based paints

or otherwise subjected to damage or

* Crystalline silica from bricks and

stress.

cement and other masonry prod-

7) An extension cord should not be used

ucts

 

 

unless absolutely necessary.

* Arsenic and chromium from chemi-

Use of improper extension cord could

cally-treated lumber.

result in a risk of fire and electric

To reduce your exposure to these

shock. If extension cord must be

chemicals: work in a well ventilated

used, make sure:

area, and work with approved safety

a. that pins on plug of extension

equipment, such as dust masks that

cord are the same number, size

are specially designed to filter our

and shape as those of plug on

microscopic particles.

charger.

 

 

 

 

b. that extension cord is prop-

 

 

erly wired and in good electrical

 

 

condition.

 

 

c. that wire size is large enough

 

 

for ampere rating of charger as

 

 

specified below.

- 4 -

Image 4
Contents Page General Safety Rules for ALL BAT- Tery Operated Tools Specific Safety Rules ServiceFor InstructionsPage Functional Description AssemblyAttaching or removing bit Attaching or removing battery pack Switch OperationClutch Torque Setting OperationSpeed Selection For Appropriate use of BatteryPack Charging During charging, the charging lamp will be litAccessories MaintenanceLamp Indications Specifications Main UnitDAY Quality Satisfaction Guarantee