Panasonic EY6950 operating instructions Specifications, Main Unit

. SPECIFICATIONS

MAIN UNIT

Model			EY6950
	Screw	Machine screw	M3 ~ M6
		Wood screw	ø 2.1 ~ ø 6.8 mm (5/64" ~ 17/64")
	driving
Capability		Masonry screw	ø 4 ~ ø 6 mm (5/32" ~ 15/64")
		Mortar/Brick	ø 3 ~ ø 13 mm (1/8" ~ 1/2")
	Drilling	Wood	ø 3 ~ ø 36 mm (1/8" ~ 1-27/64")
		Metal	ø 1.5 ~ ø 13 mm (1/16" ~ 1/2")
		Metal hole saw	Max. ø 34 mm (1-11/32")
Motor			DC Motor 18 V
No load speed		LOW	60 ~ 450/min (rpm)
		HIGH	320 ~ 1450/min (rpm)
Blows rate per		LOW	1200 ~ 8100/min (bpm)
minute		HIGH	3960 ~ 26100/min (bpm
Chuck capacity			ø 1.5 ~ ø 13 mm (1/16" ~ 1/2")
		Stage1-15	Approx.XX.X Nm, (XXX kgf-cm or XXX in-lbs)~
			XX.X Nm, (XXX kgf-cm or XXX in-lbs)~
Cluch stage
			For powerful driving and drilling.
			Percassion
Blow strength			1.7 kN, (173 k f, 370 lbs.f)
Overall length			253 mm (10")
Weight (with battery pack)			2.7 k , (5.9 lbs)

BATTERY PACK

Model

Storage battery Battery voltage

EY9251

Ni-MH Battery

18 V DC (1.2 V × 15 cells)

BATTERY CHARGER

Model				EY0110
Weight			See the name plate on the bottom of the charger.
		7.2V	9.6 V	12V	15.6V	18V	24V
		EY9065(D)	EY9080(D)	EY9006B(C)
	1.2Ah	EY9066(C)	EY9086B(C)
			20min.
			EY9180B(E)	EY9101B(E)
	1.7Ah		EY9182B(E)
Charging			25min.
time	2.0Ah	EY9168(H)	EY9168(H)	EY9106B(F)	EY9136B(F)		EY9117(V)
			30min.				60min.
	3.0Ah			EY9200B(N)	EY9230B(N)		EY9210(N)
				45min.			90min.
	3.5Ah			EY9201B(G)	EY9231B(G)	EY9251B(G)
				55min.		65min.

Note: This chart may include models that are not available in your area. Please refer to the catalogue.

- 11 -