Multiquip 21362 manual HPLA/HPHA-SERIES 36TROWEL- Specifications Trowel, SideView

HPLA/HPHA-SERIES 36"TROWEL— SPECIFICATIONS (TROWEL)

SideView

Figure 2. HPLA/HPHA-SERIES 36" Trowel

Dimensions

Table 1. HPLA/HPHA-Series 36" Trowel Specifications

A– Height (Lifting Hook)	36.7 in (931.6 mm)
B– Height Engagement Lever)	41.4 in (1,044.2 mm)
C–Width	36.5 (927.1 mm)
D–Length	70.5 (1,789.4 mm)
Weight – Operating	174 lbs./79.1 Kg.
Sound Pressure	94 db
Vibration	2.0g (19.6 m/s2)
Ring Diameter	36.5 in (92.7 cm)
Number of Blades	4
Blade Tip Speed – FPM (m/s)	1,182 fpm (6.0 m/s)
Rotor – RPM (Gasoline)	100 rpm
Path Width – in. (cm)	36 in. (91.4)

NOTE:

1.Sound pressure is a weighted measure. Measured at the operators ear position while the walk-behind trowel is operating at full throttle on concrete in a manner most often experienced in “normal” circumstances. Sound pressure may vary depending upon the condition of the concrete. Hearing protection is always recommended.

2.The vibration level indicated is the maximum RMS (Root Mean Square) value obtained at the handle grip while operating the walk-behind trowel on curing concrete in a manner most often experienced in “normal” circumstances. Values were obtained from all three axes of motion. The values shown represent the maximum RMS value from these measurements.

HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #3 (07/06/10) — PAGE 13