Panasonic EY6932 Maintenance Accessories, Use only a dry, soft cloth for wiping

. MAINTENANCE	. ACCESSORIES
Use only a dry, soft cloth for wiping	Use only bits suitable for size of drill’s
the unit. Do not use a damp cloth,	chuck.
thinner, benzine, or other volatile sol-
vents for cleaning.

BATTERY RECYCLING

ATTENTION:

A nickel metal hydride battery that is recyclable powers the product you have purchased.

Please call 1-800-8-BATTERYfor information on how to recycle this battery.

RECOMMENDED SPEED SELECTION

CAUTION: USE AT LOW SPEED WHEN STRONG FORCE IS NEEDED DURING OPERATION.

(Using at high speed while a strong force is applied may cause a motor breakdown.)

Use the following as a guide to select low or high speed for the job.

EY6932

		DRILLING			SCREW
					TIGHTENING
		WOOD /	METAL	METAL HOLE SAW
MATERIAL/	MORTAR /	YELLOW PINE
					Wood screws
CONDITION	BRICK	Thickness: 40 mm	Cold-rolled steel plate (SPC)
		(1-37/64") or less	Thickness: 1.6 mm (1/16”) or less
HIGH	ø 10 mm (3/8")	Not used	ø 6.5 mm (1/4")	Not used	ø 4 mm (5/32")
	or less		or less		or less
	ø 13 mm (1/2")	ø 36 mm (1-27/64")	ø 13 mm (1/2")	ø 34 mm (1-11/ 32")	ø 6.8 mm (17/64")
LOW	or less
		or less	or less	or less	or less
	(Slow operation)

- 10 -