Panasonic EY6932 Functional Description, Assembly, Attaching or removing bit

Page 6

. FUNCTIONAL DESCRIPTION

Clutch handle

Speed selector switch

Keyless drill chuck

Vent holes

 

 

Forward/Reverse lever

 

Battery pack release button

Variable speed control trigger

 

15.6V Battery pack (EY9231)

Battery charger (EY0230)

. ASSEMBLY

Attaching or removing bit

Note: When attaching or removing a bit, disconnect battery pack from tool or place the switch in the center position (switch lock).

This tool is equipped with a keyless drill chuck.

1.Attachment

Insert the bit and turn the Lock col- lar clockwise (looking from the front) to tighten firmly.

Slide the Lock collar to LOCK side until it snaps.

Lock collar

LOCK

2.Removal

Slide the Lock collar to FREE side. Turn the Lock collar counterclock- wise (looking from the front), then remove the bit.

Lock collar

FREE

Note: If excessive play occurs in the chuck, secure the drill in place and tighten the chuck by turning clockwise, open the chuck jaws by unscrewing the Lock collar and

tighten the screw (left-handed screw) with a screwdriver by turn- ing it counterclockwise (viewed from the front).

- 6 -

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Page Keep your work area clean and well lit Read and understand all instructionsCluttered benches and dark areas invite accidents Specific Safety Rules Do not use tool if switch does not turn it on or offMany accidents are caused by poorly maintained tools Save These Instructions Do not attempt to disassemble the battery pack housing Assembly Functional DescriptionAttaching or removing bit Clutch Torque Setting Attaching or removing battery packSwitch Operation OperationFor Appropriate use of Battery pack Speed SelectionCharging Lamp Indications Maintenance Accessories Use only a dry, soft cloth for wipingSpecifications Main UnitDAY Quality Satisfaction Guarantee
Top Page Image Contents