Line Guide, General Cuts, Pocket Cuts | Black & Decker CS718-AE

timber require special attention during cutting operation to prevent kickback.

Line Guide

The right side of the notch in the front of the shoe is the guide for straight 90 degree cuts. The left side of the notch is for 45 degree bevel cuts. The cutting guide notch gives an approximate line of cut since different blade types and thickness alter the line cut. Always make sample cuts in scrap timber to obtain the actual line cut. To minimize splintering, cut the good side down.

General Cuts

When starting a cut always hold the saw handle with one and and the front handle with the other. Never force the saw but maintain a light and continuous pressure.

After completing the cut, allow the saw to come to a complete stop. When cutting is interrupted, resume cutting by allowing the blade to reach full speed and then re-entering the cut slowly.

When cutting across the grain, the fibres of the wood have a tendency to lift and tear. Moving the saw slowly minimises this effect.

Pocket Cuts

Disconnect the plug from the power supply before making any adjustments. Set the depth adjustment based on the thickness of the material to be cut. Tilt the saw forward with the cutting guide notch on the line drawn for the cut. Raise the lower guard by using the lift lever. With the blade barely above the material to be cut, start the saw and allow the blade to come to full speed. Gradually lower the blade into the material being cut using the front end of the shoe as a pivot point. When the blade starts cutting, release the lower guard. When the shoe is resting flat on the surface being

cut, proceed cutting in a forward direction to the end of the cut. Allow the blade to come to a full stop before removing it form the cut. Never pull the saw backward since the blade will climb out of the cut and kick back will occur. Turn the saw around and finish the cut in a normal manner, sawing forward. Use a jigsaw or a handsaw to finish the cut in the corners, if required.

Maintenance

1.All bearings are sealed. They are lubricated for life and need no further maintenance.

2.The brushes are designed to give you several years of use. If they ever need replacement return the tool to the nearest service centre for repair.

Important

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment including brush inspection and replacement) should be performed by authorised service centres or other qualified service organisations, always using identical replacement parts.

Service Information

Black & Decker offers a full network of company owned and authorized service locations throughout the country. All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black

&Decker location nearest you. To find your local service location, refer to the yellow page directory under “Tools—Electric” or call:

U.A.E on 971-4-7028234

CS718-AE specifications

The Black & Decker CS718-AE is a versatile and powerful electric chainsaw designed for both beginner and experienced users. This model is especially suitable for gardening enthusiasts and those who require a reliable tool for various cutting tasks around their home or garden. With a 750W motor, the CS718-AE delivers ample power for cutting through branches, logs, and other types of wood quickly and efficiently.

One of the main features of the CS718-AE is its 18-inch cutting bar, which allows users to handle larger tasks without sacrificing maneuverability. This bar length is ideal for pruning, cutting firewood, and clearing fallen branches after a storm. The chainsaw utilizes an automatic oiling system that ensures the bar and chain are continually lubricated during operation, reducing wear and tear and prolonging the life of the tool.

The Black & Decker CS718-AE is equipped with a tool-free chain tensioning system. This feature allows users to easily adjust the chain tension without requiring any additional tools, ensuring optimal performance and safety during use. The chainsaw also includes a safety chain brake that stops the chain almost instantly if kickback occurs, providing an extra layer of safety for the user.

Comfort is another key aspect of the CS718-AE. The tool features an ergonomic handle that reduces fatigue during prolonged use, allowing gardeners and homeowners to operate the chainsaw with ease. The lightweight design, combined with the balanced weight distribution, makes it easier to navigate and control, minimizing the risk of strain and injury.

In terms of maintenance, the CS718-AE does not require mixing fuel or oil, simplifying the upkeep compared to gas-powered models. The electric motor means that users do not have to deal with the challenges of starting a gas engine, making it a convenient option for quick tasks.

Overall, the Black & Decker CS718-AE stands out due to its combination of power, safety features, and ease of use. Whether you're trimming branches, cutting logs, or tackling any other outdoor woodwork, this chainsaw provides performance and reliability, making it a worthwhile addition to any toolkit.