Black & Decker CS718-AE Setting the Depth of Cut, Fitting and Adjusting the Parallel Fence

Page 6

Additional Safety Instructions For Circular Saw

Warning! The use of any accessory or attachment, other than recommended in this instruction manual, may present a risk of personal injury.

Warning! Your saw is designed for use with wood cutting blades with a max operating speed above 4800 RPM.

Warning! Do Not use blades with a Max operating speed below this speed.

Do not use saw blades which are deformed or cracked.

Do not use saw blades made from High Speed Steel.

Do not use saw blades which do not comply with the characteristics specified within this manual.

Do not stop the saw with lateral pressure on the blade.

Do not lock the moveable guard in the open position.

Ensure the moveable guard operates freely without jamming.

Always ensure the retraction mechanism of the guard operates correctly prior to using the saw each time.

Always remove the plug of the saw from the mains supply before making any adjustments or maintenance to the saw.

Preparing Your Saw

Setting the Depth of Cut.

Remove the plug of the saw from the electricity supply.

Unlock the depth of cut lock adjustment by lifting the depth of cut locking lever.

The depth of cut can now be adjusted by lifting the rear section of the saw body.

Depth of Cut

Scale

Depth of Cut

Lever

A scale referring to the depth of cut is provided as a guide. It is located between the top guard and the rear handle.

Note, the scale is a guide only and where an accurate depth of cut is required, the actual depth of cut should be measured with a rule.

After the desired setting is achieved, lock the depth of cut adjustment by pushing the depth of cut locking lever downwards.

Where the saw blade is required to cut fully through the work piece, the blade should be set to a depth of cut 3 - 5 mm greater than the work piece.

Fitting and Adjusting the Parallel Fence

Your CS718 Circular Saw includes a parallel fence. This assists in the sawing of a straight line, parallel to the edge of the work piece.

To fit and adjust the parallel fence proceed as follows:

Remove the plug of the saw from the electricity supply.

Loosen the parallel locking screw at the front of the saw shoe.

Slide the parallel fence into the slot under the locking screw.

Slide the parallel fence towards the cutting blade until the desired measurement is

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Circular Saw 764272-00Congratulations Depth of cut adjusting Personal safety Use safety equipment Always wear eye protectionAdditional Safety Instructions Do not force the power toolMaintain power tools. Check Press properly. Do not wear loose clothing or jewelleryAdditional Safety Instructions For Circular Saw Setting the Depth of CutFitting and Adjusting the Parallel Fence Remove the plug of the saw from the electricity supplyChanging the Blade Setting the Bevel AdjustmentReplacement Blades To Remove the BladeHolding the Circular Saw Replacement blades are available from Black & DeckerOperating the Circular Saw Workpiece Support Improper SupportTo minimise the splintering Blade TwistingUse of Dull or Dirty Blades Kick BackGeneral Cuts Service InformationLine Guide Pocket CutsWatts 1500 W No load speed Accessories Technical DataModel Volts AC/Frquency

CS718-AE specifications

The Black & Decker CS718-AE is a versatile and powerful electric chainsaw designed for both beginner and experienced users. This model is especially suitable for gardening enthusiasts and those who require a reliable tool for various cutting tasks around their home or garden. With a 750W motor, the CS718-AE delivers ample power for cutting through branches, logs, and other types of wood quickly and efficiently.

One of the main features of the CS718-AE is its 18-inch cutting bar, which allows users to handle larger tasks without sacrificing maneuverability. This bar length is ideal for pruning, cutting firewood, and clearing fallen branches after a storm. The chainsaw utilizes an automatic oiling system that ensures the bar and chain are continually lubricated during operation, reducing wear and tear and prolonging the life of the tool.

The Black & Decker CS718-AE is equipped with a tool-free chain tensioning system. This feature allows users to easily adjust the chain tension without requiring any additional tools, ensuring optimal performance and safety during use. The chainsaw also includes a safety chain brake that stops the chain almost instantly if kickback occurs, providing an extra layer of safety for the user.

Comfort is another key aspect of the CS718-AE. The tool features an ergonomic handle that reduces fatigue during prolonged use, allowing gardeners and homeowners to operate the chainsaw with ease. The lightweight design, combined with the balanced weight distribution, makes it easier to navigate and control, minimizing the risk of strain and injury.

In terms of maintenance, the CS718-AE does not require mixing fuel or oil, simplifying the upkeep compared to gas-powered models. The electric motor means that users do not have to deal with the challenges of starting a gas engine, making it a convenient option for quick tasks.

Overall, the Black & Decker CS718-AE stands out due to its combination of power, safety features, and ease of use. Whether you're trimming branches, cutting logs, or tackling any other outdoor woodwork, this chainsaw provides performance and reliability, making it a worthwhile addition to any toolkit.
Top Page Image Contents